Loudspeaker sensitivity and dynamics: are the two inexorably linked?


Have been listening to quite a few speakers lately, and increasingly I've noticed that more sensitive speakers tend to have better microdyanmics - the sense that the sound is more "alive" or more like the real thing.

The speakers involved include my own Magico A5's, Joseph Audio Pulsar 2's, and  Wilson Watt/Puppy 7's, as well as others including the Magico M3, Wilson Alexia V, various Sonus Faber's, Magnepan's,  Borressen's, and Rockport models (Cygnus and Avior II).

A recent visit to High Water Sound in NYC topped the cake though: proprietor and vinyl guru Jeff Catalano showed off a pair of Cessaro horns (Opus One) that literally blew our minds (with a few listening buddies).  The Cessaro's sensitivity is rated at 97 db, highest among the aforementioned models.  That system was very close to live performance - and leads to the topic.

I'm not referring to maximum loudness or volume, rather that the music sounds less reproduced and more that the instrumentation and vocals are more real sounding through higher sensitivity speakers.

Is this a real phenomenon?  Or is it more the particular gear I've experienced?

Thoughts?

bobbydd

Showing 2 responses by britamerican

Think of thermal compression at 1 watt at 84db vs. 1 watt at 99db!! 
I’ve heard the difference hundreds of times…… the 84db (low sensitivity) sounds stuffy and congested with no dynamics. Doesn’t really matter what topology 

 

When you figure out the difference in the cross section of voice coil wire and inductor wire in crossovers you get back to us. 

I did the work for you on resistors. 50-100ppm for good ones. 200-400ppm for cheap. 25C on the cheapest resistors is 1%. Maybe it makes a 1/2 percent difference in the circuit?   I doubt even the most expensive speakers are built to that tolerance and they won't use cheap parts.

A lot of people making up stuff to suit what they want to believe here. 

I think you are barking up a tree there @alexberger . No way crossover parts are heating as much as voice coil. Inductors probably not at all and what are we paying all that money for fancy resistors for??