The above post written by itsjustme is spot on. I have a real world example that illustrates his point. The turntable involved in this anecdote is a VPI Prime and when I first bought it, I was having trouble dialing it in. Part of the problem was that I was comparing it with a Technics SL12OO. Direct drive vs. belt and all that. I bought a Phoenix Engineering Eagle PSU and Roadrunner Tachometer, which solved the speed difference between the two TTs. One of my favorite records is Time Further Out by the Dave Brubeck Quartet, with Joe Morello on drums. I am a drummer, Joe and I both studied with George Stone, and I worshipped Joe the way kids will. So much so that I bought and still own a set of Ludwigs just like Joe used. Well on Time Further Out, the recording of the drums is magnificent, so much so that on certain tracks I can hear the air passing through the air port on the top of the bass drum. That is I can hear it with the Prime plugged into the Eagle PSU, or using the SL1200GAE. That is because the speed is held consistent, which can be seen with the Roadrunner tach. At the same time, the speed can be deliberately changed up or down on either TT without losing the ability to hear the air port. But, if I remove the Eagle and the Prime is plugged directly into the wall, even though the bass drum tone does not change, the air port vanishes. With tight control of the power supply flutter goes down and this can definitely be heard on a good TT.