since you list orchestral as one of the genres you like, make sure you get an amp with some power, not a single-ended triode. other things you should be aware of are the sonic signatures of the different gear, ranging from quite neutral to quite warm/euphonic/"tube-y". if possible, you should audition a few different brands to see which sound you like.
if you don't have phono, that will make your search cheaper and easier.
I would second the mac recommendation - if you buy it used, you will lose little if anything on resale as these really hold their value - but there are a lot of decently powered integrateds out there: AR made one, CJ made at least one, Cary has a few, lots of new Chinese ones.
the type of tube will have a big impact on the sound, so buying something that can use different tubes will give you more flexibility down the road.
NOS (new old stock) tubes will pop up as an option down the road too. certain popular tubes (KT-88, 6sn7), as currently produced, are not as good as the older (40's - 70's) ones were, so there's an obvious - if expensive - way to improve the sound once you own the amp.
based on what you're saying, tubes are the right choice. you can't beat them for openness and air.
p.s.you asked about finickiness. preamps are pretty much no-maintenance: if you get scratchiness or 'tube rush', you just figure out where it's affected (L or R, CD or tuner, etc., then switch out suspect tubes until you locate the problem - no biasing required. with power tubes, you can expect - especially with current production tubes - to have the occasional loud noise, glowing tube (prior to tube failure), etc. you simply need to keep an extra set of tubes so you can keep listening. with NOS tubes, reliability is less of a factor.
hope this helps.
if you don't have phono, that will make your search cheaper and easier.
I would second the mac recommendation - if you buy it used, you will lose little if anything on resale as these really hold their value - but there are a lot of decently powered integrateds out there: AR made one, CJ made at least one, Cary has a few, lots of new Chinese ones.
the type of tube will have a big impact on the sound, so buying something that can use different tubes will give you more flexibility down the road.
NOS (new old stock) tubes will pop up as an option down the road too. certain popular tubes (KT-88, 6sn7), as currently produced, are not as good as the older (40's - 70's) ones were, so there's an obvious - if expensive - way to improve the sound once you own the amp.
based on what you're saying, tubes are the right choice. you can't beat them for openness and air.
p.s.you asked about finickiness. preamps are pretty much no-maintenance: if you get scratchiness or 'tube rush', you just figure out where it's affected (L or R, CD or tuner, etc., then switch out suspect tubes until you locate the problem - no biasing required. with power tubes, you can expect - especially with current production tubes - to have the occasional loud noise, glowing tube (prior to tube failure), etc. you simply need to keep an extra set of tubes so you can keep listening. with NOS tubes, reliability is less of a factor.
hope this helps.