2. amps-preamps
  3. 128270-214

Is It Safe to Warm Up Power Amps Without Speakers Attached

A friend brings his amp over to try with my speakers. We listen to my amps first. He plugs in his amp and powers it on to warm up for an hour before we power down my amps and move the speaker cables to his amp. Is this potentially harmful to his amp? I recall reading in a manual or an online post that someone suggested never running an amp without a speaker load. Does it depend on ss vs. tube...SET or push-pull...etc.? Cheers,
Spencer
128x128sbank
oleschool's avatar
oleschool
722 posts
 
Always been told that a no no ...

atmasphere's avatar
atmasphere
11,796 posts
 
It depends on the amp! A H/K Citation 2, Dynaco ST-70, no worries. Our stuff is no worries. Some amps (tube or transistor) can go into oscillation. Its best to check with the manual or manufacturer.
chute2011
1 posts
 
It will damage tube amplifiers.
kalali's avatar
kalali
1,977 posts
 
Worse yet is "moving over" speaker wires to the amp while its powered up. A good way to damage, possibly permanently, the output stage of the amp.
mrdecibel
3,063 posts
 
Hooking up speaker cables to the amp would not be a problem if the cables are not shorted. However, what about the inputs of the amp that is warming up ? The amp should be shut down, caps discharged before plugging into the inputs.
More to discover