Is it possible to have a quiet vinyl records

This is very helpful. I use Ifi micro iPhono2 connected to Cronus Magnum 2.
I also use zerostat 3, but I notice after playing a record it is charged with static when I pick it up. Wow, so much to learn. Amazing and real life experience when vinyl plays as it should, but I guess I still have to learn how to play a record.
Thank you.

I clean a record thoroughly, and resleeve it in my preferred aftermarket sleeve (keeping the original inner). I also use a thick HDPE outer jacket ’bag,’ so I’m not sliding the resleeved record back into the jacket, but instead between the jacket and the original inner- like a sandwich. This reduces the amount of friction in pulling a record from the jacket.

Once my records are cleaned and resleeved, they are not static-charged.

I play records and handle them in bare feet (shoes and socks, particularly on carpet create a charge).
Humidity is also a factor- in the winter, with central heating, the relative humidity goes down, making static more likely. What part of the country/world are you located in?
Lot’s of little things - I’m sure others have their own methods.
Many rely on a Zerostat to neutralize the charge on the record. I’ve owned several of them over the course of more than 40 years, but seldom need to use it.
PS: I see that you are using the Zerostat- is the record ’neutral’ before you put it on the platter? I wonder why spinning it causes a charge if it was discharged before you placed it on the platter and played it. Shoes/socks/carpet?

For what it’s worth, check the humidity level in your listening room with a hygrometer. My electric baseboard heat kills the humidity in the winter. It was down to 16% when I finally got a hygrometer to measure it and then purchase a table-top humidifier. Now, I can keep the humidity between 20 and 30 percent, and no more static ’sparks’ when I touch the turntable. My records definitely have less ’noise’ now.

Cigar shops, online and local, carry inexpensive hygrometers. Get a digital one. The analog ones have too much error.

https://www.google.com/search?q=cigar+hygrometerhttp://

just my $0.02

I don't use anti-static devices, nor do I clean my LPs with anything other than a carbon fiber dust brush.

But I am very used to no ticks and pops even with older LPs, as long as the LP surface looks OK.

The trick is a stable phono preamp. Phono playback is a bit of a trick as the cartridge and tone arm cable form a resonant circuit which can inject ultrasonic or RF noise into the preamp. If the preamp is unhappy with that, it will not sound right (will need the cartridge loaded to detune the resonant circuit) and it will exhibit excess ticks and pops regardless. Also note that loading the cartridge causes the cartridge to be less able to follow the groove as the cartridge has to do more work by driving the resistor.

The ticks and pops come from actual imperfections that would otherwise be inaudible- they occur in a very short time duration. But if the preamp is unstable, it will exhibit a damped oscillation with each event and so the tick becomes audible.

So this is really worth dealing with!

There really isn't any way to fix the phono circuit except by design.

Thank you. So if my phono preamp (Ifi Iphone 2) is not stable enough, why some records play very clean. Should all play with noise in that case. 
What makes some records to play almost perfect clean in the same setup, same day?
Thank you.