Integra 9.8 troubles

You have to select the appropriate sound track from the disc menu. Otherwise, you get the default, whatever that is; apparently stereo.

The display on the 9.8 shows what it is receiving and then the 9.8 can redistribute it as set in the input menu.

Kal

You may want to look at the AVS Forum. They have a long thread on the Integra 9.8 (and 9.9) and the issues with the unit and software updates that have come out to address some of these problems.

I don't know if the information will pertain to your particular matter but the thread is a god source of information for anyone that has one of these. The Integra is listed under Processors.

I have a PS3 and tried it with the Integra 9.8. They worked together fine once the proper PS3 AV setup settings are selected.

You have to do what Kal suggested and select the apropriate track from the disc menu first.

A BIG part of your issue is the PS3 setup. You mentioned you connected it via HDMI and the 9.8 did not automatically select the right mode for your Blu-ray discs. That is because the person who told you to setup the PS3 to bitstream is wrong. The PS3 physically cannot bitstream the newer codecs (DD TrueHD, DTS MA, etc.).

You have to let the PS3 decode internally and send LPCM data to the 9.8. When you do this, the 9.8 will not show you DD TrueHD, DTS MA, etc. on the display since it is not decoding internally. It will say either PCM, 5.1 PCM, or 7.1 PCM on the display. It simply an issue of where decoding is taking place, either in the PS3 or in the 9.8.

I do not think anything is wrong with your unit, it is a PS3 setup issue. This drove me nuts for a few hours until I figured it out. If you want to send bitstreamed data to the 9.8 from the Blu-ray player, you need to get something other than the PS3. I got the Sony BDP-S550 and it will bitstream to the 9.8 and the 9.8's front panel lights up with the correct mode automatically once you select it from the disc.

Both the PS3 and 550 are excellent Blu-ray players. Its just a matter of where you want the decoding to take place and other personal perferences.

Good luck!!

thanks for the info.... I will look for the AVS forum & see what I can find there.

FWIW - I threw in a HD-DVD & I get the same results I get from using the PS3. Integra's display states HDMI through... & it doesn't automatically select a surround setting, started the movie in normal 2 channel stereo

check menu on Integra as noted earlier.