I've strayed....


So after looking for some time at what tube gear to purchase

http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1261926156&read&keyw&zzbotit

http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1324999290&read&keyw&zzbotit

http://forum.audiogon.com/cgi-bin/fr.pl?aamps&1327691619&read&keyw&zzbotit

and coming really close to a PrimaLuna and a Rogue Cronus Magnum integrated amp, I ended up with a McIntosh C-28 pre-amp and an MC-2105 Amp.

Partly because my current speakers are (from what I've read here) not really tube friendly, partly because I can tube either piece in the future partly because I've read great things about this combination and partly because I've always wanted McIntosh gear.

With that out of the way, what else do I need to know or should I just have at it, set up the gear, start listening and begin tweaking or... is there a methodology for optimizing sound like start with flat tone controls, position speakers, once speakers provide you with xyz, adjust the bass until... etc.

As always, thanks in advance.
botit
You don't mention what speakers you have. Any reason?

Anyhow, try to be sure there is a significant difference between each speaker and the front and side walls. The same distance will give an unsmooth bass response. A difference of 40% is recommended. Also, you can move them closer or farther away from the walls to get more or less bass. I was just reading Avalon's speaker placement recommendations, and they recommend the following relative ratio from wall to speaker to speaker to wall: 4-10-4. These formulae may not all work together, but they are things to try.
Not far enough. Please check out the cayin/vas product line, great sound, great value.
Buconero117, thanks but no thanks. Why would I turn around a sell these items to go with another brand? If you have a suggestion with regards to a speaker placement (brand/model) for the existing equipment, I am more than interested, if not, thanks again and have a nice day.
More to discover