2. speakers
  3. 1297994446

I have a pair of B&W Matrix 801 S3 with a non play

ing MF driver. The HF and LF drivers sound fine. The problem is not in the MF driver. When switched to the opposite speaker it sounds fine. It appears there is no power in the wires. Broken wires seem likely culprits, as does a faulty cross over. Any advise?
chaswag
3 responses Add your response
Post removed 
magfan
1,583 posts
 
Replace caps as pairs....do both speakers at the same time with the same cap, if caps turn out to be the problem.
just my opin.

Sand Cast resistors can also crack/break, so inspect them, too.
poloman's avatar
poloman
96 posts
 
undo the binding post cup on the back of the spkr, and check the wire attatchments inside, tighten the nut on the back of the binding posts inside. easy enuff to do start there. check your amp too, L&R replace the spkr wires to check.
Log in to respond
More to discover
80x80
Living Voice OBX-RW4
80x80
Triangle Australe
80x80
Ayon Audio Black Falcon
Instrument Grade Cabinets