Hi Kacz -
It is possible that something may be wrong with the amp, but you need to check 2 things first: 1) insert RCA shorting plugs in the amp's inputs. This will tell you if the amp is quiet by itself. If you don't have any shorting plugs, take any cheap set of interconnect cables and stuff aluminum foil in the plugs on one end to connect the center pins and outer grounds together. Plug the other ends into the amp. The amp should be fairly quiet in this case (maybe just a little noise right at the speaker). If there is any obvious noise, there may be a problem. 2) If the amp is quiet with shorted inputs, you probably have a ground loop with everything connected normally. Go to this link to learn all you need to know about fixing ground loops - http://www.altavistaaudio.com/hum.html
Good luck - I hope this fixes the problem.
Happy Holidays,
Steve McCormack
www.SMcAudio.com
It is possible that something may be wrong with the amp, but you need to check 2 things first: 1) insert RCA shorting plugs in the amp's inputs. This will tell you if the amp is quiet by itself. If you don't have any shorting plugs, take any cheap set of interconnect cables and stuff aluminum foil in the plugs on one end to connect the center pins and outer grounds together. Plug the other ends into the amp. The amp should be fairly quiet in this case (maybe just a little noise right at the speaker). If there is any obvious noise, there may be a problem. 2) If the amp is quiet with shorted inputs, you probably have a ground loop with everything connected normally. Go to this link to learn all you need to know about fixing ground loops - http://www.altavistaaudio.com/hum.html
Good luck - I hope this fixes the problem.
Happy Holidays,
Steve McCormack
www.SMcAudio.com