I'm not sure what you're really asking here. I bought the CS5000 new, back in '80 or '81. I still have it as a second table. I still have the manual and all the setup stuff. I bought a cartridge alignment tool from turntable basics and set it up. The weight set up should be the same as your other table. Set the arm balance so that it floats level and then set the weight indicator to zero. This table can be irritating in that it automatically starts the platter as the arm nears the edge of the platter. The antiskate is generally recommended to be set up slightly higher than VTF. i.e. VTF=1.5 grams, antiskate=1.75. This is from memory since I am not at home. If you want, I can make a copy/scan of the manual and mail it to you. There are also different headshells that came with the arm. One has an adjustment for vertical tracking angle. Another version, reputedly better due to being more rigid, is just a regular headshell with no adjustment. There is a spacer used for non Ortofon cartridges to set the tone arm height correctly. This was used with the Grado that I originally purchased with the Table. I now have a Grado Gold on it and it does pretty well. The table was made to match well with the Ortofon.
Ben
Ben