I was very happy with my L2 using a 1:10 SUT into 47K. This works out to an effective load of 470 ohms seen by the cartridge.
How to best load my Benz wood L2
While the sound is great, I cannot help but feel that my vinyl is not properly loaded down.
I am using a Benz L2 cartridge, Anthem Pre1P phono, Sonic Frontiers 2 Preamp, and Fidelity Research FRT3 Transformer.
The Pre1P has gain of 48db, and is currently set at input impedance of 47k/100pF, output of 520 ohms, with a reccomended load of 50K-100K/100pF. I can easily solder in different capacitors and resistors to load to whatever I choose. if you click here, you will see the Pre1P manual with instructions etc on loading... http://archive.anthemav.com/oldsitev1/pdf/pre1p.pdf
My FRT3 has three settings: bypass (no gain, no nothing), 10 and 30 ohms. The cartridge suggests load of 100-47,000 ohms, and has an internal impedance of 12ohms. All through a Classe 15 Amp and Martin Logan Questz speakers. Any help truly apprecciated.
I am using a Benz L2 cartridge, Anthem Pre1P phono, Sonic Frontiers 2 Preamp, and Fidelity Research FRT3 Transformer.
The Pre1P has gain of 48db, and is currently set at input impedance of 47k/100pF, output of 520 ohms, with a reccomended load of 50K-100K/100pF. I can easily solder in different capacitors and resistors to load to whatever I choose. if you click here, you will see the Pre1P manual with instructions etc on loading... http://archive.anthemav.com/oldsitev1/pdf/pre1p.pdf
My FRT3 has three settings: bypass (no gain, no nothing), 10 and 30 ohms. The cartridge suggests load of 100-47,000 ohms, and has an internal impedance of 12ohms. All through a Classe 15 Amp and Martin Logan Questz speakers. Any help truly apprecciated.
2 responses Add your response