Hint:  Change your Wi-Fi frequency to avoid interference with neighbors router


My friend was having annoying Internet problems such as start and stop, dropped signals, streaming pauses, skips, etc. In other words, a sporadic Wi-Fi connection on his Net-Gear router that sometimes works, and most times fails to work. Everything we tried failed to solve the issue (re-boot, etc.). And the strange thing is that the connection was working fine for many months and then suddenly stopped working.

After much research, and many phone calls, we discovered these kinds of difficulties could be caused by having another customers modem/router too close. We never thought of this.

All routers must operate their Wi-Fi network on one of several “channels” — different ranges of frequencies the wireless network can operate on. If you have multiple Wi-Fi networks near each other, and you probably do unless you do not live near anyone else, they should ideally be on different channels to reduce interference.

A very simple solution. We change his routers frequency from 11 to 6 and everything worked perfectly. I am not an expert on this topic but if you are having a sporadic Wi-Fi connection that sometimes works and, most times fails to work, you might want to investigate this simple solution.

 

hgeifman

Showing 2 responses by carlsbad

@fredrik222 I'm in the market for a new wifi system for my 2 story moderate sized home.  What is your expert recommendation for a high end system. thanks.

I'm enjoying this discussion and trying to learn.  I looked at the Extreme Networks options and they are pricey and they seem mostly designed for wired input to each wireless access point.  Since my home was built in the 90s, it isn't wired for internet. 

I do work at a fortune 500 company with very high end equipment such as this in the wifi system, and our wifi at work is consistently less reliable than mine at home.  So I'm scratching my head.

Jerry