Help with BAT VK75SE

Why not look into a PS Audio Juice Bar, that just may do the trick.

If you post a pic, we might be able to asist you further.

Thanks.

You should be fine with external switching without generating any boom. I've been inside that unit and the switch is nothing fancy-- just an AC line switch with a soft-start thermistor which will continue to function in conjunction with external switching. The amp also has a warm-up relay that blocks output to speakers until the tubes bias up.

Most simple computer power strips will compromise performance. If you're handy or have access to an electrician, a better approach would be to cut a decent quality power cord and insert an electrical box in-line in the cord with a 20A AC switch. The box should be grounded as per electrical code.

I dont have a power conditioner yet, and I was told that if I get a power strip I can keep the amp in the on position and control the power with the strip. I have pretty nice power connections and the strip would compromise the sound, wont it? Also, one person told me that if I control the power externally that I would get some sort of boom signal to the speakers.

Of course if you have a switched AC wall outlet or a switch on your power conditioner, you can just leave the BAT chassis on and switch externally.

Jazzcourier:
Thanks for the response. There is ample room for it to dissapate the heat as the shelves are very high. I have no room for a dedicated amp stand because all my equipment takes up the entire wall of the room. I bought the amp used on audiogon so it is broken in. I am very, very happy with the sound---its just that damn switch.

As an owner of that amp i am in agreement about the location of the switch.If i may say so,i just can't picture that amp on a "rack" due to the amount of heat it generates.It,and you,will be happier if it has it's own stand so it can breathe a bit and that will prolong the life of your tubes as well.With a dedicated amp stand that switch will not be an issue.When that amp breaks in you can start looking at some NOS 6V6 tubes-you may want to try 2 or 3 different pairs,before you find the right sound.That will truly enhance the performance,and your enjoyment of that amp!