Currently, we use V-Caps in the phono stage of our preamp. Capacitors are still indispensable for the RIAA decoding process, so we make sure that high quality parts execute this delicate task. We have found that the Teflon V-Caps are one of the best two or three parts we have tested in this application. They give us a very accurate and detailed sound, with low coloration.
In our case, the V-Caps are connected in parallel (not in series) with the signal path, in order to maintain the direct coupling intact throughout the entire preamp. If only there was a way to eliminate these caps however, I wouldn't hesitate! For the moment, they have gained a place here.
Regarding the use of V-Caps for non-direct coupled preamps, I see no reason why they shouldn't represent a step above other capacitors (polypropylene, oil & paper, etc.) when used for interstage coupling. In this case, there is a compromise you must be aware of: The bigger the capacitor you use, the better bass you will obtain, but also the less transparency you will have. The optimal value will depend on the circuit's elements, but using less than 1 uF makes sense to me.
All in all, if you have the $$$, go get them.
Regards,
In our case, the V-Caps are connected in parallel (not in series) with the signal path, in order to maintain the direct coupling intact throughout the entire preamp. If only there was a way to eliminate these caps however, I wouldn't hesitate! For the moment, they have gained a place here.
Regarding the use of V-Caps for non-direct coupled preamps, I see no reason why they shouldn't represent a step above other capacitors (polypropylene, oil & paper, etc.) when used for interstage coupling. In this case, there is a compromise you must be aware of: The bigger the capacitor you use, the better bass you will obtain, but also the less transparency you will have. The optimal value will depend on the circuit's elements, but using less than 1 uF makes sense to me.
All in all, if you have the $$$, go get them.
Regards,