2. analog
  3. 1312058368

Graham Phantom Supreme?

Has anyone done a comparison between the Supreme and the mkII? Is it worth changing and expending the extra outlay?

The main revisions appear to be the bearing housing and an improved magneglide stabiliser (I think the internal wiring was up to a good standard already on the mkII)

There is a company called AudioMax Ltd (approved contractor?) which can perform upgrades from both Phantom I and Phantom II to the Supreme build.
Any experience of this conversion out there ?
Many thanks... :)
moonglum

Showing 2 responses by dre_j

dre_j
159 posts
 
I shared this procedure I used with Chris Feickert, Michael Fremer, and those attending the event about 5 years ago during one of Michael's seminars at RMAF.

Halcro's comment is correct.

The Feickert alignment tool can be used in this manner with the bearing cap removed. The pin on the Feickert tool will position itself center of the bearing cap prior to locking down the threaded pin lock on the tool. Once the pin is centered and locked, the threaded lock for the measuring bar can be tightened. While doing this the platter should remain locked down. Overhang can then be verified with the platter locked down and the bearing cap replaced.

Dre
dre_j
159 posts
 
I shared this procedure I used with Chris Feickert, Michael Fremer, and those attending the event about 5 years ago during one of Michael's seminars at RMAF

Correction, it was during RMAF 2008 instead of 5 years ago.

Dre
More to discover