Finally bought a new Turntable!


Hello All,
Well I done did it now, I bought myself a new Turntable.
After much research and talking back and forth on forums, looking at various models, I finally decided on a Mofi Studiodeck with the Hana SL MC Cartridge.
I bought it from a local Hi-Fi shop that gave me a 10% discount on the table and a 15% discount on the cart.
I have only had about a week so far and have not had a chance to play a much music yet. Just a few tracks here and there.
This does bring me to a question that I have for the community.

After initially playing a few tracks, I felt I had to turn up the volume a bit more compared to b4 when playing the same tracks on my Denon DP-300f, which seemed to have a bigger impact at lower volumes.

I had the shop configure my Phono Pre-Amp (Sim Audio 110lp V2) and the gain was set to 60db.

I set it to 66db and RIAA Curve. I think that improved the sound a bit more.
But what I want to know, for the particular cart that I have on the table, what are the other recommended settings?
I know the manufacturer have their suggested settings and ultimately, I probably have to try different settings and play a lot of music until I feel I have found the sweet spot but wanted to ask you all if you have any suggestions or opinions.
One other very specific question that I have is, Does making changes to the phono pre-amp have any negative effects on the system? Meaning, could I potentially do any harm to the system?
I appreciate any feedback.
jay73

Showing 1 response by mijostyn

Jay, I think you have already gotten all the important tips.

What the volume is set at means nothing as long as the background
  noise is acceptable and the loudness goes as high as you want. 
66 dB is plenty of gain for your cartridge.
If you can change the load start at 47K and work your way down.   Experiment as much as you like. You can not hurt anything.
Unless you have very old records the RIAA curve is mandatory. 

Great Table for the money. Sei Gesund (use it in good health)