@lewm - With all due respect you stated that "AS is constant in magnitude" which is not true. As Peter Ledermann confirms: "A properly designed anti-skating is non-linear, as it should of course increase A-S automatically as the cartridge approaches the inner grooves."
Feel Silly Asking This Question Alignment Parameters
I feel silly asking this question, but here it goes. Most of the arms I have owned over the years have came with proprietary protractors, and certain ones like the SME are really just overhang gauges. For other ones I have bought custom generated arc protractors for the specific arm. I will probably do so again with this Origin Live arm. However in the mean time i decided to set up using their provided protractor.
When I went to install a cartridge on the table, I found I was not wild about using their protractor, so I decided to generate a Conrad H arc protractor till I made an order for an Accutrak one. What I found odd is that Lofgren A had the longest overhang at 16.8 mm and Lofgren B at 16.3mm. The Origin Live shows 17.5 mm. Is the Rega type alignment that much different than Lofgren or Stevenson? I also noticed with the OL alignment that cartridge offset in the headshell was noticeably greater.
What is also noticeable is the sonics of each alignment is different. To be honest, I like the overall sound of the OL alignment, but I also have this nagging feeling that it does not track as well.
I always felt at this stage of my audio journey I knew how to align a cartridge. I have been doing it since I was in my 20's! Now I have a large degree of uncertainty of which alignment to choose, and what the implications are if i choose wrong. This arm is a long term keeper for me, so its a matter of wanting to get this set up optimized.
Any insights you might pass along is greatly appreciated. Do have a good chuckle at my expense as it seems that I get into these moments of self doubt, and trying to find the way out of the forest of audio can be quite comical.
Showing 3 responses by bill_k
@lewm - Just happened to catch your post, but for future posts directed to another user you should use @username so they'd be notified. I had to do some searching to find where I sourced that quote from Peter but got it. It's on the following page in the "There's More..." section. https://www.sound-smith.com/faq/how-do-i-adjust-anti-skating-my-cartridge He covers many of the important aspects of AS there. |
@lewm - Notifications when you're mentioned in the forums is I believe controlled by a setting in your AG profile. For the record (no pun intended) the only issue I raised from your earlier post was the claim that "AS is constant in magnitude". I'm also in agreement that the use of AS is an approximation and not an exact science. |