Extreme NEWB Questions and Speaker Identification


Actual post is below the picture links, thanks!

https://i.ibb.co/njNFxHh/3-D97166-B-536-A-4-A0-E-A597-64-A686543982.jpg

https://i.ibb.co/rs1RmB2/229-A91-A1-5-EF7-4052-8-A7-E-C66-CE6-D7-A9-F4.jpg

https://i.ibb.co/HrXktd6/A60-DA45-E-C090-4-CB7-88-E9-F4-E65970-EEA1.jpg

https://i.ibb.co/6Wj7rR0/4824-E144-CFF4-4775-84-BF-D1-E449-CF9-EFA.jpg

https://i.ibb.co/Wx5LTGh/BAD9125-C-ABA2-4535-A0-C9-02-B774-E4-ACEE.jpg

https://i.ibb.co/ygyHTFr/5709-E642-0973-4548-AFB3-05-D97-F5-A2-BB9.jpg

https://i.ibb.co/vZc7dbV/DF99-B296-99-DA-4-B66-AA08-D0846-BB54428.jpg

So I’m recently new to the speaker game and need some help. Trying to set up a garage space we can use for get togethers etc. I kept seeing a lot of secondhand audio equipment for dirt cheap when I browsed by and sell pages so decided I’d pick up a receiver and some speakers. The receiver I got is a Harmon Kardon AVR 1700. I knew basically nothing about it but it was $20 so I just bought it.

In looking for speakers, I stumbled upon these “Essence” speakers and the only reason I was Interested was because they had a high end “look” to them. Plus they were basically free so I decided to take a chance. When I picked up the speakers, I realized they were huge. 40 inches tall and probably 50 pounds a piece. I was thinking to myself that these had to be a pretty penny in their day. I cannot find any model number on the speakers other than a handwritten number under each of the speaker lids. When I google Essence speakers, I can’t find anything that matches these.

Questions...
1. Anyone know what these are or what they’re worth? They’re in basically mint condition.
2. I’m assuming these are too powerful to use on my “new” receiver. How do I know what power of receiver I need? They had spade wires on them and my receiver doesn’t accept those.
3. If my receiver can handle them, what kind of speaker wire should I get?

thanks for the help.


scottwissing
1. No bass? Have you looked inside the speakers to make sure the woofers are completely wired up? No bass is not ordinary. The sub-woofer issue has many opinions on this forum--they are interesting and I recommend you read them. Since you are running HT, presumably you have a sub-woofer anyway. If you do, then you should be able to run your system in a 2.1 configuration (the 2 represents "two channel" the .1 represents the "subwoofer"--forgive me if you already knew that--your title says "Extreme NEWB" so I'm trying not to take anything for granted).
2. Don't worry about purism--only you and your family have to live with your audio decisions. I suggest you check out Blue Jeans Cable for all your current cabling needs. They are made well and won't gobble up your audio budget--you probably didn't realize you now have an ever present audio budget :-)
3. I will leave it to others to help you better match a 2-channel amp with your speakers, since I don't have any direct experience with them. It appears Dale Pitcher also made amplifiers, which should match well with his speakers--but they appear to have been very pricey and don't seem to come on the used market very often.
It would help if you could find out the power rating on your speakers. Then you could know how many watts you need to make them shine. Your HK AVR-1700 is rated at 100W/channel. If everything is working properly in your speakers--put your ear to each tweeter and woofer to  make sure (with the volume at a low level)--then your bass problem is probably because your receiver doesn't have sufficient quality power to drive your speakers properly.
Just my two cents.
Enjoy the journey.
These speakers sound absolutely amazing vocally...never really heard anything so pure. However, there is little to no bass...
If the speakers are powered by a AVR, please make sure the speaker setting is "Large" or "Full range" and not "Small"
Musical design amplifiers do pair very nicely with Dale's speakers, a small company, pretty reasonably priced, I have Dale's electronics but did have experience with these for an extended period of time.