Electrostatics and tubes


I am looking to get some new to me speakers,  I've been looking at options and would really like to try a set of planars "electrostatics".  I have read or heard somewhere that as far as speakers go they tend to be inefficient (85 to 89) vs.90+(db) on the Klipsch or Dali's I've been tossing around as a standard speaker option. I guess my question is would I need to worry about any over heating issues. I plan on using plenty of power with a set of VTA, M-125's to power them. I am looking at a lower budget set maybe Martin Logan ESL 9's or Magnepan 2.7i .    Just wondering I would hate to over heat a few hundred dollars worth of tubes if I don't need to.   ¯\_(ツ)_/¯  don't roast me to bad I cry easy wink  thanks.    

128x128hotrod6871

We have owned the same pair Quad ESL-57s, bought new in 1979. Before that, another set that we sold because they were copper, we wanted black. If you really want some fun, ask if the copper or the black Quads sound better. We have run them successfully with a Quad 405 current-dumping solid-state (100W x 2), and now with an Audio Note Cobra tube integrated (28W x 2). The Quads sound much better with the tube amp and there is plenty of power. We recently replaced the Jolida JD100 tube output CD player with the tube output Audio Note CD 3.1x/II player. Again, a remarkable improvement. I think electrostats, at least ours, are MUCH happier with tube power. You can purchase used and refurbished Quads from reliable people. The sound is something to experience - so transparent, it is spooky.

 

 

@terry9 and @sierratrails: I’m amongst friends!

 

In the spring of 1973 I paid my first visit to one of the new high end shops that were popping up around the U.S.A. in the wake of The Absolute Sound joining J. Gordon Holt’s Stereophile (Gordon was the mag’s founder and chief---often sole---reviewer) to serve the hi-fi appetites of we boomer generation new audiophiles. The shop (named Audio Arts) was located in Livermore, CA---about halfway between my town of San Jose and the state’s capital, Sacramento (where my mom was born and raised), and was owned and operated by a fantastic guy named Walter Davies, later known for his Last Factory record and tape care products..

Also paying his first visit to the shop that day was Bill Johnson of Audio Research. Talk about good luck! Bill was a pilot with his own little plane, and he flew himself and a complete ARC/Magneplanar system from Minnesota to Livermore, to install in the shop’s excellent listening room (one of the best I’ve ever been in). Back in 1971 I had seen an ARC Dual 50 in San Jose’s best hi-fi shop, but at that time the name meant nothing to me.

The Dual 50 was driving a pair of ESS Transtatic I loudspeakers, for which I was lusting (they unfortunately cost $1200/pr, which at that time this starving musician couldn’t sell enough blood to buy wink). The Transtatics featured three RTR ESL tweeters, the first ESL’s I had heard. They reproduced the sound of cymbals as I had never before heard. I now own a pair of them, bought used in 1982 for $400.

Anyway, I spend a few hours listening to Walter and Bill talking all things hi-fi as Bill installed the system, getting myself a nice education. The system was a pair of Magneplanar Tympani T-I loudspeakers bi-amped with D51 and D75 amplifiers, an ARC SP-3 pre-amp, and a Thorens TD-125 Mk.2 with a Decca Blue pickup mounted on a prototype ARC tone arm not yet in production. That was the most consequential day of my hi-fi life! Having heard that system, I just HAD to get it for myself.

Later that year Walter installed the exact same system in my listening room, minus the ARC arm. I paid for the arm upfront, but used a Decca International Arm (on loan from Walter) as work on the ARC prototype proceeded. When the arm was cancelled (it never went into production), I got myself an SME 3009 Mk.2 improved. In using the Decca arm I learned that I don’t care for unipivots.

I was happy with the system for about a year, but when I heard the new Fulton Industries Model J loudspeaker---which used the same RTR ESL tweeters as the ESS Transtatic (as did the original Wilson WAMM, along with a pair of KEF B139 woofers, also the woofer in the Transtatic), though six of them, and a dynamic woofer in a transmissionline enclosure---well, the failings of the Tympani’s became glaringly obvious. Out came the Tympani’s, in went the Model J’s (the sale of the T-I’s and D51 paid for them).

But the honeymoon was short lived; I quickly learned that while the J’s were indeed more transparent than the Tympani’s, and had greater low end weight and extension, the vocals and instruments sounded like they were being squeezed out of three boxes (look up a pic of the Fulton’s to get the picture). Images produced by the Maggies were spread out before me, floating in space, free of the Mylar diaphragms producing them. With the Fultons, those same images were coming through little holes in the wall at the location of the speakers. I learned I was a planar man.

I now own the Transtatics, a pair of Old Quads, a pair of Tympani T-IVa (bought from Kent of Electrostatic Solutions), and two pair of Eminent Technology’s: both the LFT-4 and LFT-8b. Plus Rythmik Audio and GR Research subs. What I need now is a room big enough for them all wink.

 

For those who don’t care for this long-winded tale, my apologies. My last of them, I promise (and this time I mean it).

 

Just to pile on a bit, I have the Magneplan 3.6r with dual self-powered subwoofers driven by an NAD M33 which is rated at roughly 380wpc at 4 ohms, and I would consider that the minimum.   I'm considering trying a Bi-Amp setup using the companion M23 amp one of these days; I just don't get enough chance to enjoy them since work tends to keep me busy.

Try to audition a pair of Martin Logan's with the powered bass cabinets (Ethos, Montis, etc) ....takes the "weight" off of the tube amps for powering the lower frequencies.

Seems like there is a lot of dialog with watts and playing loud. I own Electrostats and Maggie's.  All of my amps are Monoblocks pushing out over 700 watts per block. Sometimes I play them loud,  but most of that power is for the dynamics, power in reserve for the speed, control and peaks that will make those panels sing. You can play loud with any amp, if you like distortion. The high wattage,  high amperage power amps are what's needed to get the most out of your panels at any listening level.