Ear 834P or Decware ZP3 or other tube phono stage

The Aqvox 2CI/PrimaLuna PL2 is a killer combo.SS phono with adj. gain,cap and loading (up to 75db in balanced operation) and tube integrated (40W via kt-88s).

Fretshop

You should also look at a Modwright tube phono stage (9.0 SE).
I am using one after trying out other ones like Graham Slee, and SAP phono stages. I also have a VPI Scout with a Denon DL-S1 MC cartridge.

Most of this stuff is pretty much beyond my stretch dollar wise. It's also a good distance away from my comparably modest speakers and power. Is there anything worth auditioning under $2000? That's where the Ear and the Decware came from...bang for the buck.

I pretty much have $2500 in my table and cartridge but maybe $800 in amp and speakers. Obviously I have no idea how much I have in records, but I'd imagine it's not as much as you'd think. Many were bought in collections for next to nothing and of course it stretches over 37 years.

Regardless, I'm fond of my JBL 4311's because I'm very used to them. I had intended on replacing the power however I wanted to do the phono stage first. I think besides my table it's the most significant part of my upward move.

A couple of months ago I would have advised you to look at the George Wright WPP200C - IMHO a great unit for the price, under $900 as I recall. Unfortunately George passed away recently so you can't get a new one, but they (and the older but still very good WPP100C) are available here and sometimes on craigslist.

You certainly couldn't go wrong with a good pre-loved Audio Research PH-3 or better yet an SE model. They're seriously good units (for the price) and if not your cup of tea you can resell it for what you paid for it. Some folks rave about the Jolida JD 9A- it's said to be another very good tube phono stage in it's price range ($450 or so).

Finally, I would suggest that you take a look at the Soundsmith mono cartridges. They are true dual coil mono units, so you can use the mono cartridge with a normal stereo phono stage. According to Peter "Doing so gives added dimensionality, while not detracting in any way from the advantages that mono reproduction has over stereo. This makes switching between VPI arms to go from mono to stereo a breeze. No changes required at the preamp. Swap arms, and you’re done." The last comment is assuming that you are also using a Soundsmith stero cartridge.

The monolithic ps 2 is a steal at around $600. great adjustability and clean clear sound. I have a high resolution system with several expensive tube and ss phono stages and keep coming back to the monolithic. Later if you wish you can upgrade to an outboard power supply.