Duelund conversion to DIY Helix Geometry Cabling


I have been an avid user of the Duelund cabling for over two years now and have used them exclusively in my system with great results. I have built many for friends and have used a full loom of interconnects, speaker cables, power cords and an extensive wiring modification for a previously owned balanced power conditioner utilizing Duelund 600V PolyCast wiring which was transformative. My cabling desires can be a little addictive as I have owned and evaluated 40+ brands of cabling costing more than an entire stereo system!

Over the past six months I stumbled upon a thread here on Audiogon in regards to a Helix designed cabling and as you probably already know, I just had to look a little deeper into this cable design…After a month of studying and sourcing parts, I decided to reach out to the designer/architect, Williewonka who gave more insights and philosophy on how the cable came into existence.

That conversation got the ball rolling in converting one of my KLE Duelund interconnects to Steve’s Helix designed which only entailed replacing the neutral with a Mil-Spec 16 AWG silver-plated copper wire with the neural wire being 3 times longer than the signal wire and of course the “Coiling” of the neutral wire : )

After the modification was complete, I was not sure what to expect from the Helix cabling but I was quite shocked with the results with “ZERO” burn-in time…The sound stage became much wider/deeper with a much tighter/focused image and clarity/transparency is like nothing I have ever heard in any cabling regardless of cost. In fact, I just sold a full loom of a commercially designed Helix Cable that’s renowned around the world and has more direct sale than any cable manufacturer; these $200 DIY Helix Cables walked all over them…

I believe you will hear the same results as I have and have heard back from friends who have already modified their Duelunds with the same results; WOW! Remember the cables will need 200+ hours to burn-in and settle into your system. My system is now 90% DIY Helix to include IC, SC, PC and Coax with each cabling adding its beauty of an organic and natural presentation that draws you into the fabric of the music.

You can tailor the sound of your cables using Duelund, Mundorf silver/1% gold, the outstanding Vh Audio OCC Solid Copper or Silver with Airlok Insulation or your favorite wiring and you can change it at any time…

 

http://www.image99.net/blog/files/category-diy-cables.html

https://forum.audiogon.com/discussions/difference-in-sound-between-copper-and-silver-digital-cables

https://forum.audiogon.com/discussions/adding-shielding-to-existing-cables

 

Enjoy,

Wig


128x128wig
Transphorm Increases Noise Immunity and Reduces Switching Noise with Third Generation GaN Power Conversion Platform
https://www.transphormusa.com/en/news/transphorm-increases-noise-immunity-reduces-switching-noise-third-generation-gan-power-conversion-platform/

Simply give any GaN-based USB-C wall chargers a try, IsoTek Blue Horizon was showing 710 → 254 → 129 → 091 after this particular one was thrown into the mix:

https://streamable.com/9ezeba
https://www.facebook.com/ho.keung.18/videos/249065390005674

Some gadgets would reduce the noise, others could go the opposite direction and IMHO that's why it's so much fun to experiment:

https://www.youtube.com/watch?v=JmYeG5ziTi4

BTW, there's a big brother of PC-Triple C in Japan and hopefully PC-Triple C/EX would perform even better:

https://www.sengoku.co.jp/mod/sgk_cart/detail.php?code=EEHD-5L3X
PC TripleC /EX has a forged Silver Sheath onto the Wire.
It is not Cheap, SAEC are charging $900 Dollars for Tag Wires.

I have a length to Strip and produce Tag Wires and Tonearm Wires from.
I am also hoping there is enough to use internally within the Monoblock Amp's when they are modified to become a Balanced Design.
@ ghettocowboy

my favourite XLR plugs are in order of performance:

Neutrik silver plated (better resolution than gold plated, best price/performance ratio)

Vampire Gold plated ( if you prefer the warmer sound of gold plated, approx $12/pcs at soniccraft or partsconnexion.)

ETI Kyro silver ( if you looking for max. resolution)