I moved from the Hegel h360 to the psa bhk 250 amp and sounds much better. IMO, you wouldn’t be saving much room by getting rid of the mono’s, just stack them in a rack or put each 1 in back of the speaker. You might want the power of the mono’s in the future if you decide to get different speakers. For a smaller room I used to have the totem mani 2’s that I drove with 1000 watt mono blocks because these small speakers were so inefficient. Keep the 300’s, if you are all digital and have a ds sr dac as you only source, get rid of the preamp and go directly to the mono’s from the dac.
Downsizing: Separates>Integrated --PSAudio>Pass Labs
Moving soon to a smaller space.
Currently have PS Audio BHK 300's and a BHK Pre Amp.
Keeping this stuff in new space will work but have begun thinking about going with an integrated amp.
Any thoughts on going from my PSAudio separates to a Pass Labs Int-250?
Thank you
- ...
- 32 posts total
@hheedah the Musical Fidelity M6si was definitely my other choice! A solid piece of gear and it does everything so right. I may end up getting one for my man cave system that would benefit from the extra power the M6 has. The other I was considering was the Anthem STR. Can’t go wrong with either one. |
honest answer is i don’t know.... the pass integrateds do have a little less headroom than their sister power amps (int60 vs xa30.8 for instance)... depends a lot on how loud you listen - but since you’re coming from the bhk300 monos i sense you are used to having alot of power... maybe safer to get the larger amp -- the treos are rather inefficient (85 db/w/m) but present a fairly reasonable/middling impedance load (6 ohm nominal, 3 ohm min) to the amp i would concur with others saying that big pass amps do get quite pricey, and if getting best value for $ is a priority, i personally would try a hegel h390 or 590 (with perhaps a tube staged dac)... they sound uber clean and lovely, if a little leaner than the pass ... stepping back from the specific amp, if you go to a straight solid state integrated you will need to replicate the tubed input stage of the bhk’s elsewhere else in the chain to maintain a similar tonality i suspect |
- 32 posts total