2. cables
  3. 158713-136265

DIY interconnect just arrived ~~navships~~, true High Fidelity

So i invested $$$$$ ona  DIY interconnect a  few weeks ago, and it was a failure,,,So thought I'd search ebay, founda  Iwoa seller ~~navships~~~ offeringa  16 ga copper/silver coated for under $50,,, just arrived, and wow,,, now the highs not rolled off,,,sound does not break up at high volume, details not heard before,,,comparsion made with  basic generic interconnects,,but honestly what I am hearing,,I have no thoughts of looking further.
These are The Interconnects that deliver all I could expect in a  cable.
Now i am a  believer than Interconnects do make a  difference in sonics/resolution. 
He offers money back guarantee.
The drum cymbals can be heard and other details of Gatemouth Brown's guitar comes through cleanly. , The over all sound is clean,   more separated the fq's. ,,,
If we imagine a rating score of 10,,I'd give navships cables a  10/10. 
If you want to send me your high price interconnects and make a  shootout, please do,,I'll pay shipping.both ways.   



https://www.youtube.com/watch?v=q5yfgu627MA&feature=youtu.be
mozartfan

Showing 10 responses by ditusa

ditusa's avatar
ditusa
2,028 posts
 
CLEEDS no code violation no plug go back and read less amps draw at 230v then at120v did you google dan's amps the rich man that buys his amps cant buy a $8,000 power cord or a $500 plug what will he foolish spend his money on dan knows all so when i bought my crown amp they give you the wall plug in the box a 30 amp plug in the manual they tell you to call a electrician no you cant plug a 30 amp plug in a 20 amp plug
when i bought my amp no way to plug it in did not know that a the time thats why now i do not have a power cord or plug on my amps i call a electrician  and learn the dan way the power cord and the plug are out of the circuit on my amps at my place what power cord sounds the best i do not know
ditusa's avatar
ditusa
2,028 posts
 
hi i use the same wire 12 awg #M22759/11-12 black and orange in a HELIX geometry for my speaker cables my speakers cables are 2' long speakers are jbl 4435 and 4425 studio monitors i run mono blocks silver plating on that wire is thick its nice the helix gemetry minmizes noise in the ac line and RFI/EMI on the signal cable
ditusa's avatar
ditusa
2,028 posts
 
MOZARTFAN-PTFE is teflon
ditusa's avatar
ditusa
2,028 posts
 
MOZATFAN teflon is good i bought navships orange and black 12 awg m22759/11-12 is the best for speaker wire if you use the helix geometry it will be great google helix geometry i made mine low cost 12-14awg sound the same to me i went 12awg i have 2-amps one 760 watts one 250 watts if not helix geometry run the cables 4'' apart bare wire tined is the best way no brass junk
ditusa's avatar
ditusa
2,028 posts
 
MOZARTFAN;all cables are pure bs marketing i remove my power cords from my amps hard wire them to pannel no change in sound google floyd toole loudspeakers and rooms speakers are 50% of the sound the room is 50% of the sound all new tube amps are 80 years old whats new they all go back to the 1920s its bs
ditusa's avatar
ditusa
2,028 posts
 
MOZATFAN hard wiring a amp is removing the power cord the line from panel with a iec plug direct in the amp should sound better no cord ?you do not hard wire a power cord to the wall dum
ditusa's avatar
ditusa
2,028 posts
 
MOZATFAN do not forget empiredon on ebay same as navships great wire i bought wire from him to make my speaker cables no your jaw wont drop just great cable
ditusa's avatar
ditusa
2,028 posts
 
TWOLEFTEARS+1 thats how i made my speaker cables helix geometry
ditusa's avatar
ditusa
2,028 posts
 
CLEEDS when i run my crown ref 1 amp i change the break to 30 amps i hard wire the crown no power cord no plug i have 10/3 awg wire in the wall thats 30amps 250v max my crown amp comes with a 125v 30 amp plug when new i can change the volts on the crown 120v to 230 how much power the amp draws changes but it will have the juice to its max 250v at 30 amps no power cord no plug pure sound thats how you connected dan’s amps the relentless monos google d’agostino dan amps his relentless amps do not have power cord or plug pure sound dan knows
ditusa's avatar
ditusa
2,028 posts
 
MOZARTFAN thats fine my point was removing the power cord or having a power cord in the line the sound is the same to me you said the better cord you made sounds the same as the junk cord the amp came with my point is power cords are marketing bs you think so to the ac wall plug 120v 15 amps 14/2 awg wire in the wall put a 12awg power cord on the amp to the plug you will not get 20amps for the amp more juice the way i did it i will get up to 30 amps max for my crown studio ref1 amp that it needs no power cord is not hard to do its cost $0000 to do how much money do good power cord cost you know that all i was saying
More to discover