Denon DL-103 retipped with micro ridge stylus on boron cantilever & denuded body


As a card-carrying Denon DL-103 fan, I keep returning to this classic LOMC cartridge. After trying different cartridges, no other cart was capable of giving me that unique fiery sound as the good old DL-103.

However, my friend Robert (owner of the https://www.thebrokenrecord.net/ site) recommended I get one of my DL-103 retipped with a more modern stylus. I was very skeptical, because I've tried in the past to purchase retipped DL-103 cartridge (the original conical stylus replaced with the nude elliptical), and it only made the cart sound much worse.

But because I trust Robert's advice, I decided to take the plunge and following Robert's suggestion, I contacted Andy Kim of the needle clinic (http://www.phonocartridgeretipping.com/).

Andy was very prompt, kind, and approachable. He offered me some options and I went with the top of the line mod: micro ridge stylus on boron cantilever & denuded body.

Turnaround time was swift, and pretty soon I had the rejuvenated, retipped and denuded DL-103 in my hands. Couldn't wait to install it and do the listening tests.

The first thing I've noticed upon spinning the first record using the micro ridge stylus was that the mods to the cart did not in any way affect the familiar tonal characteristics of the trusty old DL-103 (previous mods with the nude elliptical did affect the overall character of sound).

Secondly, the sound quality notably improved! There are now so many new details, and the delivery seems more effortless. Any traces of sibilance (which are present with my standard DL-103 carts) have disappeared.

I'm not sure if the dramatic improvements are due to a better stylus, or to a better cantilever, or to the denuded body, or to all three factors combined, but I'd say this mod had propelled my lowly DL-103 into the stratosphere. Such small overall investment for such spectacular improvements!

Andy's retipping services are highly recommended.

crazybookman

Showing 2 responses by williewonka

+1 for a mod'd DL103 👍

I had a standard DL 103 on my Audiomods Classic arm, which uses a rega arm tube, so it was not really compatible.

MOD #1 - I epoxied the cartridge to a brass plate, which had a similar impact as  adding the alumunum shell to a nuded DL 103 - but for only $12.50

MOD #2 - I purchased a DL103 from Soundsmith which had their ruby camtilever with a Optimized Contour Mico-line stylus. I then applied the same brass plate mod from above to this cartridge also

  • this cartridge provides significantly more/finer details with amazing dynamics and a very nice balanced sound 
  • superb control of sibilemce
  • I have stopped looking for any other cadrtridge 

One thing to add

  • I added KLE Innovations Absolute Harmony RCA's to the one piece harness on my arm, which boosted performance to ne heights
  • or better still, try the new Perfect Harmony RCA plusgs 
  • This is a highly recommend upgrade to any turntable cable or interconnect

Seems you are either in the DL103 camp OR NOT !

  • I have read a few negative comments on the forums here about the DL103 and wonder how much better could these other cartridges be
  • but this modified cartridge on my Audomods arm, going through a Simaudo MOON LP5.3 RS phono stage, into my Bryston B135 integrated amp and through to my Gershman Acoustics SONOGRAM speakers - I just wonder how much better could I want it to be ?

Regards - Steve

 

 

@lewm - Yep - I realized that - it was the main reason for completing that tweak.

I performed the tweak on the standard 103 first and discovered the benefits of matching the compliance of arm and cartridge.

I forget just how much mass was required, but I made the plate to match that criteria.

The Soundsmith mod’s were the icing on the cake.

The cardtridge without the plate sounded very good - but the plate gave the cartridge the exrta "life" it was missing i.e. compared to the standard 103 with the plate

Is it the best cartridge (for the money) on the planet ?

  • the standard 103 with the plate was better than any other cartridge I had tried (from Goldring, Nagoka, Rega)
  • The Soundsmith 103 with the plate is in a totally different league.- amazing!

A friend had a retipped Van den Hul Frog on an Audiomods arm and I it sounded very similar to the Soundsmith 103 + plate, so I’m pretty happy with it’s performance - at a fraction of the price.

Regards - Steve