Buy yourself a test record like Hi-Fi News Test LP to make sure your system works fine, you can check everything with this test LP (and there is a free protractor inside)
dead cartridge? Darn the Luck ! ! !
Old OM20 that I haven't touched in 20 years. Tried it direct thru my Onkyos phono pre. Nada.Then I tried an outboard NAD pre. Left only.
I swapped sides. Right only. Pre is OK.
I reseated the cartridge wires at the headshell, both sides, 4 pins.
Tested continuity from the cartridge wire through to the NAD input. All 4 pins good.
I know it's rare, but is there something I forgot? Seems I have a dead right side.
I swapped sides. Right only. Pre is OK.
I reseated the cartridge wires at the headshell, both sides, 4 pins.
Tested continuity from the cartridge wire through to the NAD input. All 4 pins good.
I know it's rare, but is there something I forgot? Seems I have a dead right side.
- ...
- 13 posts total
this is way too old for warranty and it worked fine when last I used it ..... 20 year ago. I’ve tried every which way to flip phase. Nothing changes it. But I’m not sure which way the head shell is configured. I just assumed logically, left and right, but perhaps it’s crossed like the Ortofon.https://farm5.staticflickr.com/4861/30936942687_5989ca5d33.jpg Kind of thinking now that lack of use, aging, whatever has messed it up inside. Don’t think I’m dropping $50 for a test record. This is not my old 24 track Ampex 1200. I tested another source thru the pre, the pre is fine. it’s either me crossing wires or the cart failed with age. From Ortofon tech supp: "There are two possible reasons for channel missing or level differences: the incorrect position (rotation - in front view) of your cartridge in the tone arm. The other is a defect in the cartridge itself caused by aging, rotation of the armature or shunt(s) between the turns of one coil. " |
I can’t find a wire diagram for my Philips AF 887 tt headshell. So I’m just guessing.Your Philips head shell will likely be wired left side pins and right side pins, each top-bottom pair comprising a channel. On the Ortofon OM series, the top two pins are one channel and the bottom two pins are the other channel. Red is still right channel positive and white is still left channel positive. green is right channel negative and blue is left channel negative. |
- 13 posts total