DCS 1394 problem

Hi,
I have a Elgar+/Purcell/Verdi/Verona stack and encountered this "search.." or DAC resuming problem several times. Again, I agree that they are both due to either bad cables or loose 1394 sockets. In my case, I am using ortofon 1394 cables. The socket cannot hold the connector well after a period of time due to the weight of the cable.

I found a loose cable/socket will interrupt DAC because every time when Elgar detect a new machine in the 1394 bus, it stops and resumes. After identifying the bad cable/socket, removing the unnecessary 1394 cable will certainly solve this problem.

During the debugging procedure, I have another interesting problem not relating to the 1394 bus. My Elgar+ cannot decode dual AES 132k and 176k data in synchronized or master mode. But if it operates in slave mode, it has no problem to decode 132k and 176 k data. Though I seldom use dCS stack in this mode, does anyone have experience on this issue? Is there any problem with my Purcell?

BTW, recently when I reset Elgar and Verdi to factory default, the screen shows "Contact dCS for SW upgrate". Does anyone ever see this message? Thanks.

Chau Ching

anyone with an used working 1394 card available?

Hi Ccchiong,

Regarding the message SW upgrade I think it is a normal message, when you reboot you will reboot to the software version you have installed on your Elgar/verdi.
If your stack is "old" and you have not upgraded the software it could be an idea to contact a dCS dealer to get the newest software for your stack.

Regarding 176 k data I was using this in master mode on my purcell/elgar when I had a problem with 1394, I think if I remember correct that you then also have to set something in the menu in the purcell, but memory here is a bit fading out now.

Regarding 1394 cable, I think you know can get them relatively cheap from a aftermarked cable supplier or contact dCS, I will be surprised if they are expencive

Kind regards
Geir
Norway

finally 1394 cards are replaced with new ones and units are working fine. I am looking for the small card that is attached to the rear chasis. If avialble, please email.
Thanks.