dbx 14/10 Graphic Equaliser Question: Stored Memory Curves


Hi,

I have a dbx 14/10 graphic equaliser and have been using the auto equalisation capability and then storing the resultant curves in the memory slots 1 to 6 (i.e. I have placed the calibrated microphone in 6 different locations and run the automated equalisation process). I can see that the process is being performed okay.

How can I tell if the equalised curve has been saved okay in the selected memory slot?

If I select the memory location should the stored curve be displayed on the graphic equaliser ?

I do not see anything on the screen if I select the individual memory locations at the moment.

Any feedback advice gratefully received.

Paul.
par

Yes the presets should be on the screen unless you turn off the eq and turn it back on. The back up battery may need replacing. I has to be soldered in on the 14/10 I think. I really liked the one I had. Don’t forget L=R settings; and or L+R.


Polk432 thanks for the swift feedback.

I have now put a new battery in place - quite a job given as I had to remove both circuit boards in order to de-solder the original battery.

The 14/10 is now saving the curves okay.

Many thanks,

Paul.
I'VE OWNED 10/5 10/20 20/20 AND THE 14/10 HAS ALWAYS BEEN MY FAVORITE EQ. I JUST WISH THE BATTERY SITUATION WAS LIKE THE OTHER DBX EQ'S. I HAD ONE WITH THE MIC THAT HAS MATCHING NUMBERS YEARS AGO WITH THE BOX AND MANUAL FOR 400.00 CONDITION 10 AND SOLD IT FOR 675.00 BUT WISH I STILL HAD IT. GLAD YOU FIXED YOURS. BEWARE THE 20/20 ALWAYS HAS PROBLEMS FOR SOME REASON. YOU BATT SHOULD LAST 3 YEARS OR BETTER. BEST OF LUCK.