Stereotimes review posted. The Ayon Audio Odin SET run in parallel with a DF of 12, operation in class A, and with zero negative feedback, is another amplifier that can be added to the list of compatible amplifiers that work well with the Nenuphars. I also have a new pair of FW SIT-1s that are having the voltage changed at Pass Labs that should mate well with my 6H30 tube based Ayon Audio S-5 Network Player/Preamp/DAC. I like to change it up from time to time between tube and solid state based amplification.
Cube Audio Nenuphar Single Driver Speaker (10 inch) TQWT Enclosure
Cube Audio (Poland) designs single drivers and single driver speakers.
Principals are Grzegorz Rulka and Marek Kostrzyński.
Link to the Cube Audio Nenuphar (with F10 Neo driver) speaker page:
https://www.cubeaudio.eu/cube-audio-nenuphar
Link to 6Moons review by Srajan Ebaen (August 2018):
https://6moons.com/audioreview_articles/cubeaudio2/
* Frequency response may vary and depends on room size and accompanying electronic equipment.
Principals are Grzegorz Rulka and Marek Kostrzyński.
Link to the Cube Audio Nenuphar (with F10 Neo driver) speaker page:
https://www.cubeaudio.eu/cube-audio-nenuphar
Link to 6Moons review by Srajan Ebaen (August 2018):
https://6moons.com/audioreview_articles/cubeaudio2/
----------------------------------------
Parameters (from Cube Audio):
Power: 40 W
Efficiency: 92 dB
Frequency response: 30Hz - 18kHz ( 6db)*
Dimensions: 30 x 50 x 105 cm
Weight: 40 Kg
* Frequency response may vary and depends on room size and accompanying electronic equipment.
- ...
- 1567 posts total
Here is Mike Girardi's Stereo Times Cube Audio Nenuphar review: http://v2.stereotimes.com/post/cube-audio-nenuphar-loudspeakers-by-mike-girardi/ Thanks, Mike. |
Hello everyone, I been away from the site for quite a while and it’s very encouraging to see such a civil and informative thread still going on from my last visit. I have not had the pleasure of owning, or even hearing, the Nenuphar’s but hope to remedy both scores before too long. I’ve been lusting for them ever since David’s, Srajen’s and so many others glowing reviews of them. They seem to be a transcendent speaker that isn’t outrageously priced. My wife may disagree with the last part of that statement 😜 |
Nenuphar journey, part 4. The next amp to listen to with the Nenuphars was the FirstWatt F-1. The F1 was the first model of the then new First Watt enterprise. The amp in my living room was serial number 017, put together by the master himself at home. The general idea with amplifier damping factors is that the Cubes can be overdamped so that lower is better. And the most obvious 'better' with low DF is more bass. The F-1 is probably unique in that its output impedance is a whopping 80 ohms. Since the DF is calculated by dividing the speaker impedance by the amplifier output impedance, for the Nenuphar and F1 combo we have 8/80 = 0.1....Yowza! Well, yes. It seems the F1 is a bass beast. Too much so for this boy when listening to Yellow's Toy album, but great with the growling intro to Biloxi (off The River & The Thread album by Rosanne Cash). If anything, there was a bit of bass overhang, probably from too low a DF. There was a touch of sibilance on Joni Mitchell's A Case of You. The soundstage was average/normal for my setup. Next up, the SIT-3 |
- 1567 posts total