A reviewer in one of the magazines converted his garage and I have heard it and it sounds good. You will find a lot of advise, especially if you visit studio sites such are gearslutz (which is changing it's name). After helping build my brothers recording studio, one of the most important aspects from staring from scratch is determine the proper dimensions and make sensible alterations if possible. The other lesson is to make sure the room is as sturdy as possible, including using double walls and or thicker sheetrock. Also sealing all cracks and gaps with acoustic calk including the floor seam where the structure meets the floor.
Converting two-car garage to listening room. What would you do?
My wife is angling to get my mountain of audio gear out of the living room and I have graciously consented. :-) So off to the two-car garage I go, but first it has to be made livable, and we've started talking to contractors. It's not a huge space: roughly 18 x 19.5 feet, with a vaulted ceiling that crests at about 16 feet. I'll be leaving the basic structure in place but everything else is up for grabs: I can play with dimensions (a bit), lighting, where I put the (20 amp) outlets, acoustic treatments, and so on.
My main question is currently if I should "toe in" the walls so as to not make them parallel. Would it help the acoustics if I had four walls that measure, say, 18 feet and 17 feet on the shorter sides, and 20 and 18.5 feet on the longer sides? In that case, no corner would be at precisely an 90-degree angle. I read somewhere that that will eliminate or reduce room nulls and peaks, but I don't know much about this stuff. However, I'm willing to learn! Any acousticians here? Words of advice? Thanks!
My main question is currently if I should "toe in" the walls so as to not make them parallel. Would it help the acoustics if I had four walls that measure, say, 18 feet and 17 feet on the shorter sides, and 20 and 18.5 feet on the longer sides? In that case, no corner would be at precisely an 90-degree angle. I read somewhere that that will eliminate or reduce room nulls and peaks, but I don't know much about this stuff. However, I'm willing to learn! Any acousticians here? Words of advice? Thanks!