2. tech-talk
  3. 149245-22849

Converting balanced output from a DaySequerra tuner to unbalanced input for my preamp?

Hello, 

  So, I found a good deal on a used DaySequerra M4.2S HD tuner so I snapped it up. I now realize that it has only balanced XLR outputs and my preamp has all unbalanced RCA inputs and a balanced output to the amp. What is the best way for me to convert the balanced signal from the DaySequerra to the unbalanced input on my preamp?

  I noticed that Sweetwater sells some $79 boxes to do it but is that the best way to go?

  The DaySequerra is an experiment because my beloved McIntosh MR-78 is getting walked all over by strong nearby stations and even the DynaLab Signal Sleuth can't fix the problem. 

  Thanks for the help! 
  Larry  
Ag insider logo xs@2xlarrykell

Showing 3 responses by atmasphere

atmasphere's avatar
atmasphere
11,615 posts
 
All XLR outputs are male.
atmasphere's avatar
atmasphere
11,615 posts
 
I’m going to get a cable made so as to ignore the cheap op amps in that box.
That is my advice :)
atmasphere's avatar
atmasphere
11,615 posts
 
@larrykell

You probably only need an adapter. Most likely, the adapter would be set up with a female XLR connector going to a male RCA. Pin 2 of the XLR would correspond to the center pin of the RCA and pin 1 of the XLR would be the ground of the RCA. If you encounter a buzz, then pin 3 of the XLR should be tied to pin 1. But try it first without that last bit.

Alternatively you could have the female XLRs wired to your existing RCA cables in the manner described above.
More to discover