Contact -enhancer, fuses - NOS 1260 High fidelity audio cables


My friend bought a  bit what seems a bit pricy, but I split the cost ,and without question this very special blend is far more powerful then I thought ,I expected a small change but just letting it play for several days a profound improvement, I took two pair of wire wire eclipse cables one treated one not , , as well as fuses 
and then removed , my brother changed them not mentioning which ones ,only 1 sets time needed for integrated amp 
a sizable increase in resolution and image depth , soundstage too was wider as well as deeper .I 
waited a couple hours in between , the fuses synergistic orange , they too were very much improved .
I am going to let them seat  in another 100 Hours at least .I still have not done the power cord, or speaker cables yet . I am very impressed. I was very much a skeptic, since I already have been using 
stabilant 22 which I thought was respectable increase in fidelity . Before making any type of opinion 
it’s well worth trying ,I was told in a week they are coming out with 1/2 size bottles for $349 which will do several audio systems, a light application goes a long way and IMO a noticeable increase in fidelity 
for minimal cost.
128x128audioman58
Will see how good in a year like Walker silver that turned out to be pure crap.Good luck.
The stuff works well , I spoke with 2 guys who were doing test trials.roughly 10 months ago and still holding up  well.
you apply right a way ,just a thin coat it has a little brush ,I prefer small foam swabs , on just the male rca 40% the length. , all blades of AC ,and IEC 
and on all speaker connectors, fuses and tube pins. It’s dark so you can see when covered. ,if you remove ,a cable just reapply. It takes awhile for it to dry 
about 300 hours before it is fully settled in .
Are you sure you can use this on tube pins? Most if not all other contact enhancement products do not work on tube pins, due to extreme heat. Other than that, sound great!
Here is the reply I received today from Hi Fidelity


"No it does not dry its liquid form only and replications are really at your discretion and really only of you remove and insert a new different cable or repeatedly remove a cable for some reason. The material is mostly nano based so it should stay quite well and not need a reapplication if just unplugging and plugging back in. That said some people choose to reapply anyway I often do myself. BTW it does go a long way so reapplication is not an issue as far as expense reapplications are relatively inexpensive (material used minimal) they seam beneficial and easy to do so I do it myself even if I lily don’t have to. Does that help?"


ozzy


@ozzy     If what you posted is really his verbatim reply then all I can say is that I hope the product is a whole lot more accomplished than his English skills.