Contact -enhancer, fuses - NOS 1260 High fidelity audio cables


My friend bought a  bit what seems a bit pricy, but I split the cost ,and without question this very special blend is far more powerful then I thought ,I expected a small change but just letting it play for several days a profound improvement, I took two pair of wire wire eclipse cables one treated one not , , as well as fuses 
and then removed , my brother changed them not mentioning which ones ,only 1 sets time needed for integrated amp 
a sizable increase in resolution and image depth , soundstage too was wider as well as deeper .I 
waited a couple hours in between , the fuses synergistic orange , they too were very much improved .
I am going to let them seat  in another 100 Hours at least .I still have not done the power cord, or speaker cables yet . I am very impressed. I was very much a skeptic, since I already have been using 
stabilant 22 which I thought was respectable increase in fidelity . Before making any type of opinion 
it’s well worth trying ,I was told in a week they are coming out with 1/2 size bottles for $349 which will do several audio systems, a light application goes a long way and IMO a noticeable increase in fidelity 
for minimal cost.
128x128audioman58

Showing 13 responses by antigrunge2

There is a cheaper solution: Mad Scientist Audio Graphene Contact Enhancer (madscientistaudio.com) Works a charm for a fraction of the cost. Only inconvenience is long shipping time from NZ.
@ozzy

sounds like a case of overdosing: this needs to be applied in absolutely minimal amounts. If you had arching, you most likely put on too much.

In my case the result was outstanding, particularly on tube sockets and fuses and -holders
What may be perceived as a damping of higher frequencies is actually a reduction in harshness as a result of reduced interference.
Mad Scientist audio Graphene Contact Enhancer (madscientistaudio.com) Works a treat!
@ozzy,

‘Smoothly does it’ as the common denominator?
Boggles the mind, good luck
Ozzy,

a suggestion if I may: you have a wonderful system and obviously put a lot of thought into putting it together. Pls consider moving your lovely amps behind the baffle of your speakers, valves are very sensitive to vibration and your Focals are very apt to generate some in the bass!
All the best


@ozzy,

You are welcome and I trust you’ll hear a difference, particularly at higher volumes.There is no need to play the system while the graphene is settling, it takes a few hours only
Definitely: have a go: you‘ll be positively surprised. Go back as high up the chain as you possibly can. There is weird benefit from doing the inside of the contacts in your power plugs as well on both ends