Connecting F-type cable to Mcintosh Tuner



I have a McIntosh Mr-66 and would like to connect my Magnum Dynalab Antenna to it using a F-type coax cable. All the Mac has for connectors are small screw terminals. Any suggestions for how to connect the antenna.
dmalcolm
There is an adapter available. It has a place for two screws and a female F-type you will need a male F to F block. All should be available at radio Shack. You might also look at making an female f type with stranded wire I believe that would yeild better signal transfer.
It's a 300 ohm to 75 ohm adapter. Just like a older TV would use. Screws on one end and a female F connector on the other. Link is below.

http://www.amazon.com/75-to-300-Ohm-Matching-Transformer/dp/B000E9U9A8/ref=sr_1_3?ie=UTF8&s=electronics&qid=1241407945&sr=1-3
Using the adaptor will work but you will lose 3db of gain. If your station comes in strong enough, no problem. If you notice a problem, get a folded dipole at Radio Shack (6 bucks). It's terminated with small spades that will fit your Mac perfectly. I actually prefer it to my ST-2.