2. speakers
  3. 165901-160344

Connecting Bose 901 Equalizer to a receiver or another graphic equalizer

Greetings!  I've read a lot of the discussions posted; contacted Bose, Yamaha, Sony, and Kenwood, and still can't figure out how to reconnect my 901 EQ to my system.  Before I moved, the EQ/speakers were connected to this system and worked wonderfully.  My receiver does not have pre-outs but it does have tape play/record and so does the Kenwood EQ.  If someone can assist, I'd be very grateful.

I see a lot of people do not like the 901s.  When I graduated high school and joined the Air Force in 77, I purchased 3 pairs of 901s in Okinawa JA because at that time I loved them.  The pair I kept all of these years are the special edition oak cabinets on stands.  Several years ago, I had the speakers (tweeters) rebuilt.  I have an emotional attachment to them now.  Thanks for your help!
bill901s
motoraway's avatar
motoraway
61 posts
 
Try the Bose community? Not familiar with Bose equalizer but I'm thinking the path to the receiver goes tape out of bose equalizer to tape in on kenwood eq and then kenwood eq tape out to receiver tape in then receiver tape out back to bose tape in? Seems like the logical path to me. I fully understand that emotional attachment as I have Sansui integrated from 1974 that I cant' part with! 
g_nakamoto's avatar
g_nakamoto
348 posts
 
i agree that if your unit does'nt have pre pit main in then you have no choice but to use the tape loop.do you get sound when using the tape loop? if not, your eq maybe defective!!
bill901s OP
3 posts
 
Thanks for your quick responses.  I will try some of the recommendations this afternoon.  The frustrating part is I know the system works...because it worked before.  If I can't get it to work, I will look for a receiver that's compatible with the Bose EQ and has the pre-outs like the Yamaha RS-700.  Thanks again.
russ69's avatar
russ69
3,505 posts
 
Corrected, I think. 

"...the path to the receiver goes tape out of kenwood to tape in on the Bose EQ and then out of the Bose EQ to tape in on the Kenwood. Switch the tape monitor on and off and you can hear the difference.  If you get it wrong just switch one end of the interconnects and it will be right. 
oldhvymec
5,101 posts
 

Try the Bose community?

<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>

LOL This is the Bose community, just most of us changed 35 + years ago. They are still in the shop somewhere under silks, along with 20 + other pairs of retired, or in the process of being made speakers..:-)

OP it is "OUT IN, OUT IN. Out of the tape monitor into the EQ, out of the EQ and into Tape 1 or 2. Select the tape loop your going to monitor (1 or 2) and make sure your plugged in there. 1 or 2 (if you have two) And engage the monitor switch or button. Actual pre in or out is not the best way, that is NOT passive, it is in the path and active.

The cables, the wire inside and components were just CHEAP...

It's better to use tone control and see if the "LOOP" is better or worse. In the preamp path you can't disengage the EQ.. Your stuck with CRAP.. OK...

Regards
More to discover