2. amps-preamps
  3. 1428160381

Clayton Audio Class A amps. Need amp advice

Hi Guys,

I am looking to change my amps and for a few reasons.

First because I just upgraded my DAC from the great PS Audio DirectStream to the incredible Bricasti M1 DSD USB DAC. I love the Bricasti and it has shown that in my system it could offer me more with a more resolving and neutral amp IMO.

I am currently am using the wonderful sounding CJ Premier 12 mono tube amps. I love them and tubes in general but my speakers are the great Ascendo C8 Renaissance and look to present a somewhat benign load being 88 efficient and 6ohm but they are unique and have an internal firing 21 cm Kevlar Bass driver that is great but stubborn and the speakers I think will really shine with a iron fist control of that driver.

I love tubes, always have and always will but I grown tires of a flabby bottom which is exasperated by a unique and somewhat difficult to grip bass driver set up I spoke about above.

I want an amp that can give me as much tube sound as possible but with Grip and bottom end. I know this is a lot to ask for in the used $5k to $7k price range.

I have read and it seem like the Clayton offer exactly what I am looking for but wanted to hear from some of you guys if anyone has ever heard them or know of them or anything. Any info would really be appreciated. Here is the info on my speakers and I will also list the rest of my system in case you think that is helpful. Thanks

C8 Renaissance
Technical Data
Principle
• Three-Way with SASB bass unit (TOS Off)
(current damped outer driver with semi symmetrical band pass)
• Four-Way with SASB bass unit (TOS On)
Dimensions (W/H/D)
• 28 / 80 / 40 (without Base)
• 28 / 108 / 40 (with Base)
Weight
35 kg
Frequency Range
29 Hz (-3 dB) – 32.000 Hz
Power Rating
350 W Program (min)
Impedance
6 Ohm
Sensivity
88 dB / 1W/m
Outer Chassis (COAX)
• 25 mm Neodymium-fabric-tweeter
• 18 cm Woofer with XP cone
Inner Chassis
• 21 cm Chassis, Kevlar cone
TOS Chassis
• Ribbon-tweeter
TOS Function
• switchable (TOS Unit - Dipole AN / AUS)
Sockets
• Single / BiWiring Base
Dimensions (W/H/D)
28 / 18 / 40 cm
Weight
11 kg

Ascendo C-8 Renaissance Speakers (Germany) Speaker
Purist Audio Design Corvus Praesto Revision 2.5m Bi-Wire Speaker cable
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Bricasti M1 USB / DSD / Volume Control DAC (New) DA converter
Tellurium Q BLACK DIAMOND Reference USB Cable
Decware ZSTAGE External Triode Output StageTelefunken ECC801S
Audio Research REFERENCE 1 MK II w/Rhodium IEC/NOS Tubes Tube preamp
PS Audio PowerPlant Premier AC Regenerator
Conrad Johnson Premier 12 Mono's 140 Watts Tung-Sol KT120's Tube amp
Salamander Amplifier Stands (2) Synergy System AV Furniture Stand
BMI Shark Jeweler Grade Platinum 9 AWG AC Power Cable
Mad Scientist PC-NEO with Power Purifier 11 AWG Power Cable
Sablon Audio Petite Corona 2.0M 7 AWG AC Power Cable
JPS Labs The Power AC+ 2M 8 AWG AC Power Cable
Synergistic Research Labs Tesla Series SE T1 AC Power Cable
Synergistic Research Labs Tesla Series T1 AC Power Cable
PS Audio Noise Harvester (5) Converts noise to light
OYAIDE RI Beryllium Power Outlets (2)
Blue Circle Audio The Yalu Balula Industrial Surge/Spike Protection
JPLAY v5.2 hi-end audio player turns PC into a digital transport.
Fidelizer Pro Version 6.1
JRiver Media Center 19 Music Software
fsmithjack

Showing 1 response by rdoc

rdoc
95 posts
 
Frank,
I do not know your room or where you live. But, I had a Pass XA-30.8. It was one of the very best amps I have ever owned. I thought it would be my last amp. I bought it in the winter. When summer came in Texas, I had to sell it because of the heat that it generated (375 watts at idle).
After an hour of listening, I would start to sweat because it put out so much heat! So, if you are going to get the Claytons, make sure the ac in your listening room is up to the task.
More to discover