You can put the speaker on top of the TV and measure the distance from the bottom of the speaker to the top of the sloping cabinet. Then go to a sheetmetal shop and have a shelf made that is L shaped. It should be the width and depth of the speaker with a bend pointing down to rest on the TV cabinet. You can spray it black to match the TV and take some rubber feet and slice them slightly and put them on the edge of the metal where it rests on the slope.
Center Channel Placement Issue. Need Help
I am looking at purchasing an HDTV ready rear projection set. However the top where the center channel would rest is only 5 in. deep. My center channel a Mirage OM-C2 is (24w X 12d ) thus 7 inches would be hanging off the edge (not very stable). I cannot place the speaker below and also cannot wall mount above display unit(windows with shutters directly behind). Are there any accessories that have a plate that lays on top of display and extends toward back with cushioned legs that would balance on the sloping portion of display ? I recall seeing something like this a couple years ago. What are some ways to resolve this issue ? The OM-C2 is one big center channel. Thanks for your responses.
3 responses Add your response
