2. analog
  3. 1146970403

Cartridge alignment help.

Hello and THANK YOU in advance.

What is the cause of silibance from one channel only(right)? This only happens with vinyl playback and seems to be worse during the last few tracks. How can I make this better? I have Scout so there is only minimal anti-skate. I tried twisting the wire with no improvement. Is it another component of set-up? I wanted some advice before I ruin an otherwise good cartridge postion.

I appreciate your help.

-Greg
janikian
6 responses Add your response
janikian OP
18 posts
 
Thanks everyone. I appreciate our advice very much!

-Greg
dougdeacon
3,338 posts
 
I've read good reports on VA about the optional antiskate mechanism VPI now offers for the JMW-9. If you can't get the right adjustment with the wire-twist method, that might be worth looking into.
cello
645 posts
 
.
Greg,
.
As Scott suggested, I would imagine it to be related to the set up of your antiskate. Check your azimuth first and then play with the anti-skate.
.
I had the same problem as you describe and it was all related the the amount of antiskate (mine was too low).
.
Rgds,
Larry
nsgarch's avatar
nsgarch
2,524 posts
 
In addition to SD's comments, you might want to re-check the stylus overhang, and them check/adjust the cartridge yaw (rotation in the headshell viewed from above) To do this properly, you need an alignment protractor (I like the DB, but there are many good ones) to insure that you have tangency at two points across the record. The fact that this occurs during the last tracks leads me to believe this adjustment may be off.
sdcampbell
2,136 posts
 
The problem you describe sounds like the cartridge is mis-tracking in the left channel. This can be due to the anti-skate not being properly balanced between the channels, or due to an incorrect azimuth for the cartridge.
janikian OP
18 posts
 
I am sorry - the silibance is coming from the left channel.
Log in to respond
More to discover
80x80
Synergistic Research PHT - Phono Transducer
- Green Dream and Black Widow
80x80
SME 3009 3012 V IV 309 312 III Tonearm Restoration & Rewire
80x80
CHOIR AUDIO Turntable with SME 3 tonearm