2. tech-talk
  3. 177660-4741

Can moving wire location at circuit breaker reduce hum?

The power line going into my music room will oftentimes make the amps’ transformers hum.  I’ve tried many things but have had no luck.  If I take any component that’s humming into a different room run on a different circuit breaker, the hum disappears.

Would swapping out the wires that go into the two separate rooms at the breaker make any difference?  Or is it more likely that one of the outlets on the circuit that goes into my music room is somehow miswired and is causing the hum?  I can unplug everything from the circuit except for my amp and it still hums.

Any suggestions on what I might be able to do short of hiring someone to run a dedicated line?

Thanks,

Mamoru

 

128x128audiodwebe

Showing 1 response by milpai

milpai's avatar
milpai
2,322 posts
 

When I was building my room, I was advised that "the 2 dedicated 20 amp lines MUST be on the same phase leg. Otherwise I could get a ground loop".

Is the hum present when the component is connected to amp with RCA/XLR, or just the component into the electric outlet? Because if you just connect the component to the electric outlet and no other cables are connected to that, then you can rule out the ground loop.

More to discover