Sensitivity is the lowest value that the phono input will amplify correctly. Since the cartridge also has an output of 2.5mV, that is the lowest value that will work correctly. You would have been better off with a higher output phono cartridge. The way it is now, you don't have a lot of options. A SUT will not help since you only need a step up of 1:2 or 1:3. Any more than that will overload your phono stage. I don't believe there are any SUTs in that range.
Can I make the volume louder by using a pre-amp?
Please offer any advice on whether I can make the output volume louder by inserting a phono pre-amp or SUT in my system. I just purchased a Rega RP6 to get back into the sound of vinyl. I currently have to crank up the volume to get decent output.
I have relatively old equipment. My current system is Denon AVR-3808CI receiver that I am using as a pre (phono is 2.5mV input sensitivity with 74dB S/N and 150mV rated output); Rega RP6 with Dynavector 10x5 cartridge (2.5mV output voltage); Parasound HCA-2205A amplifier (220W per channel @ 8 ohms); Paradigm Monitor 9 speakers.
I understand that the output voltage of the cartridge matches the input sensitivity of the receiver. Is this the best I can do, or does it make sense to increase the gain by using a pre or SUT? Do I have some other limiting factor in the equipment chain with the components I have?
Any input and/or suggestions is appreciated. Thank you. -Dan
I have relatively old equipment. My current system is Denon AVR-3808CI receiver that I am using as a pre (phono is 2.5mV input sensitivity with 74dB S/N and 150mV rated output); Rega RP6 with Dynavector 10x5 cartridge (2.5mV output voltage); Parasound HCA-2205A amplifier (220W per channel @ 8 ohms); Paradigm Monitor 9 speakers.
I understand that the output voltage of the cartridge matches the input sensitivity of the receiver. Is this the best I can do, or does it make sense to increase the gain by using a pre or SUT? Do I have some other limiting factor in the equipment chain with the components I have?
Any input and/or suggestions is appreciated. Thank you. -Dan