Cable Goop Review George is going to freak!!

 Hey ozzy, i just ordered the NPS-1260 and noted you spoke about a  QSA fuse. I recently put a QSA fuse in my  ADD-POWR Sorcer X2 which in itself was a game changer for me. The QSA fuse, unexpected  from my earspective, more than doubled the wondrous effect of the Sorcer which was a shocker. Did you hear a positive difference right away or what when you put NPS-1260 on the QSA fuse? Also same question on power cables and effect. I have enjoyed your previous comments thru the years and appreciate any observations you have made, thanks marc

Thanks for your input ozzy. Did you put any 1260 on your PSA fuses and if so was it about a week like the SR fuse? Did you coat all or most of fuse end? Also on the power cords were they the same too? It is hard for me to admit but i tried and now find it hard to live without the QSA red and black fuse in my Sorcer. I justified it by spreading it between my birthday and christmas gift to myself. For a complete picture I need to tell that i ordered a plastic top for Sorcer. So as i was testing back and forth changing fuses i noticed a big difference by leaving top off than on even with the plastic top. The harmonics seem to dramatically increase and improve with top off. 
    My girlfriend plays an electric keyboard in the next room to my stereo and it greatly improved with top off and QSA fuse installed.She and i heard it almost immediately. The harmonics  I will mention the only fuse in my stereo is in the Sorcer, so not sure if that is a factor as to outsized difference the QSA fuse had. Just count me a happy and satisfied music lover!

Hey ozzy the NPS-1260 will be here soon and i was wondering did you use it on the RCA jacks of equipment the cables plug into? Also did use it with usb or anywhere else you would advise? Any warnings you can point out? I thank you for all your input.
   Yes for me there is a big difference with top off of sorcer which is right next to my integrated amp. I am curious if anyone else has same reaction. 

Of special note is the use of "transformative" when used in usb and spdif connections

Thanks for info ozzy. I recently email Rick (inventor of 1260) from high fidelity cables and asked him about usb. here follows my email and his response. I think it will be of interest to many.
  Hi, are there any videos of applying NPS-1260 to usb, spdif,ect. yet? Will there be any by you if not? Enjoy your products, thanks marc brown
 
    Eventually yes this is planned however it's quite simple. There are two methods for USB depending on the size of the USB you can use the small applicator that looks like a tiny Q-tip or potentially even a toothpick get a magnifying headlamp and try to put the material on the strips of the USB. The first few times this is the method I used however now all I do is wipe the brushoff very good on the top of the bottle inserted into the USB end of the cable and wipe it around. To get it in there some of the bristles will bend back you need to make sure it gets into the connector well so I kind of tap it in.This will leave a lot of material on the dielectric however I have found no issue with that and no difference in sound. At first I was careful not to do this but it didn't seem to make any difference performance was still the same even when it was coating the dielectric.This allowed me to do things like USB-C. One thing I'm careful to do is after applying there will be a lot of material on the end of the USB where it doesn't need to be I use a paper towel and wipe this material off so that it's only on the inside.Spirit has done the same as an RCA the pin is simply smaller so it's very easy to do.I'm not sure when we're going to have time for videos but I suggest that you can confidently move forward.If you're leery and want help I could FaceTime with you or something like that just let me know.Have fun Marc.Rick

 Also saw this about the NPS- 1260 and usb and spdif ect. 

     

It has been tested to work well on power cords, and fuses (apply with care) as well as circuit breaker connection and the wires connected to these devices, receptacles are an obvious choice. Obvious uses are on RCA’s, XLR’s, speaker cables, speaker jumper plates, thin applications on USB and HDMI AES3 and SPDIF have been “transformative” successful in our testing.

It can be used on coaxial cable wires connecting your Wi-Fi system or ethernet cables removing the excess from the plastic connecter itself completely so that it is clean afterward.

Can be used on antenna connection of routers, digital cables of all electrical types. Patch cables, quarter-inch cables 1/8 in cables headphone connections of all types, mini-XLR, and others have been successfully treated.

ozzy i asked mike from tweek geek to affirm the NPS-1260 was good by the inventor of the PSA fuses and if there is any warnings.  what follows is mike response. Thought it might be useful to some, marc

        It is fine, just don't get it on the sticker around the fuse.
Kind Regards,

Mike Garner | Head Geek