Yamaha is my favorite mass market AVR for sound quality and reliability. Bad news it’s it’s still an AVR and thus its 2-channel performance is compromised and greatly holding back what your nice speakers are capable of. And, the only thing worse than the amps in your AVR is the critical preamp section, so both need to be replaced and as mentioned above the easiest and most cost-effective way to do that is with a good stereo integrated amp. And if you’re into vinyl you’ll likewise wanna upgrade your phono preamp as that makes a huge difference as well. Adding these two components into your HT system will absolutely transform your 2-channel performance and probably remind you a lot more of what you heard when you auditioned your speakers.
Before getting into how to hook this up, which is absurdly easy BTW and we can discuss that later, the most important thing now is to share what sound characteristics are most important to you and what improvements you’re looking for over what you have now. That’ll give us a much better idea of what to recommend for your particular goals/tastes/system. With your budget you’ll be in great shape, and you should be very excited for the significant improvements you’re in store for.
Just to maybe calm any fears/questions you may have about hookup, it only requires one additional interconnect if using and integrated amp (two if you get a separate amp/pre) and the stereo amp is hooked to your front L/R speakers. The beauty of this configuration is that you can switch between HT and stereo with the push of one button, and in stereo the AVR will be completely out of the signal path so it’ll be pure 2-channel audio as if you had a completely separate stereo system. Hope this helps.