Audio Refinement Complete integrated amp. The removal of the tweeter grils is really, really easy, I just went through alot of trouble to find out how easy it is. I can't say enough about how much smoother it sounds without the metal grill in front of the tweeter. I'm sure that most people prefer the sounds of the 805 (and most other speakers) with the grill cloth removed. It sucks, because you can't do this for the Nautilus 800s tweeter.(notice how the Nautilus flagship has no metal grill). I think it looks better -like I said before, it looks not at all like the speaker has been modified, altered, or otherwise less then like it should look for a $2k pair of monitors. It is very easy to put the grill temporarily back in place, and hear what you left behind, because the tweeter magnet actually pulls at the metal grill. I wish I had a digi camera, I could post a picture. I know is sounds sketchy, but it is sooooo much smoother. Anyone that wants to try it, email me, and I'll talk you through it if my directions weren't as concise as you'd like.
B&W Nautilus Tweeter Grills - Lose 'em
I figured out how the Nautilus tweeter assembly disassembles (accidentally), but sufficed to say, it is very easy to take the tweeter tube apart, without going into the speaker cabinet proper. YOUR MILEAGE MAY VARY THIS IS THE 805!!!!!! Tweeter assembly MAY be different on the floorstanders)
I was able to disassemble the tweeter tube, while looking at the grill, to see if there was any way to take the metal grill out of the picture. First, you remove the "shroud" (part grill, part tweeter assembly)(the grill to the joint with the gap, about 1" in length), simply by twisting it counter-clockwise against the main black part of the tweeter housing. WHen it turns, the shroud, tweeter, and rear silver part of the tweeter tube (toward the rear of the speaker) will all be moving as 1. About 1/4 turn, and it comes right off, leaving the tweeter/tweeter tube (1 piece) itself in the main black stationary part of the tweeter assembly, the part that makes contact at the bottom to the main speaker enclosure. Once it was off, I could see that the grill was a separate assembly, and just pops off (try rotating it first, just to see where the lip is).
READ THIS PART DO NOT SKIP< YOU MIGHT BE SORRY <
BUT once I disassembled the tweeter assembly, I could see that it wasn't even necessary to do so, in reality, I could have just taken the grill off without actually taking the WHOLE tweeter apart. Oh well, I ligned it up, 1/4 twist clockwise, and it was back on perfectly. Sound is much improved, which you will easily able to A-B', since the metal grill is "pulled" into the right place (just don't snap it back on) by the tweeter magnet. I heard much cleaner highs, less grain. It looks cool, too, not at all "altered". I havent snapped mine back on, and dont plan to do so. As always, your mileage may vary, but I did it, no problems at all, and it sounds better on my 805s. Glad to be sharing this one.
I was able to disassemble the tweeter tube, while looking at the grill, to see if there was any way to take the metal grill out of the picture. First, you remove the "shroud" (part grill, part tweeter assembly)(the grill to the joint with the gap, about 1" in length), simply by twisting it counter-clockwise against the main black part of the tweeter housing. WHen it turns, the shroud, tweeter, and rear silver part of the tweeter tube (toward the rear of the speaker) will all be moving as 1. About 1/4 turn, and it comes right off, leaving the tweeter/tweeter tube (1 piece) itself in the main black stationary part of the tweeter assembly, the part that makes contact at the bottom to the main speaker enclosure. Once it was off, I could see that the grill was a separate assembly, and just pops off (try rotating it first, just to see where the lip is).
READ THIS PART DO NOT SKIP< YOU MIGHT BE SORRY <
BUT once I disassembled the tweeter assembly, I could see that it wasn't even necessary to do so, in reality, I could have just taken the grill off without actually taking the WHOLE tweeter apart. Oh well, I ligned it up, 1/4 twist clockwise, and it was back on perfectly. Sound is much improved, which you will easily able to A-B', since the metal grill is "pulled" into the right place (just don't snap it back on) by the tweeter magnet. I heard much cleaner highs, less grain. It looks cool, too, not at all "altered". I havent snapped mine back on, and dont plan to do so. As always, your mileage may vary, but I did it, no problems at all, and it sounds better on my 805s. Glad to be sharing this one.