Audio Research SP20 vs LS25 and Whest Phono Pre


I am currently using an Audio Research LS25 mk I and Whest PS .30r Phono Preamp. I have been brainstorming and planning my eventual upgrade path. The Ref 3 is an obvious choice to upgrade the line stage, and that is indeed on the radar. However, a really interesting option is the ARC SP20, if it performs. By selling both my line stage and my phono stage, I can free up enough funds to potentially "upgrade" for free.

Can anyone tell me what they think about the movement from the LS25 and Whest to a single box preamp, in this case, the ARC SP20? The reviews are good, but I would value the option of fellow Audiogon members.

My 2 sources are a Lyra Delos and PS Audio Perfect Wave DAC mkII.

I recently got into headphones, and purchased a pair by Audeze, so the headphone amp on the SP20 is a nice bonus. I would get to listen to vinyl late night while the family is sleeping!

One concern I have is that my Whest is providing 60dB of gain to my Lyra Delos. Then, the ARC LS25 is providing 18dB of gain through the balanced connection. The specs on the SP20 are showing lower gain in the phono stage and lower gain in the line stage section of the preamplifier. Does this mean that the SP20 will not produce as much volume in my system? As it is now, I have to crank the volume up to the 3 o’clock position on the LS25’s volume knob to get particularly loud music with my turntable, sometimes even a hair past 3 o’clock to get to concert levels. (Amplifier is ARC VT100 mkII and speakers are Wilson Sophia 2)

I am not a gain and wattage expert - the electrical nuances of amplifier design are above my pay grade, but I am trying to learn more!

Thanks,
Mark
marktomaras

Showing 1 response by amaglioc

I'm approaching the start of my third year with an SP20 and enjoy it very much. Cartridge matching was a challenge with that 58dB fixed gain. I spoke with ARC directly and was told to stay above the .5mv level, which led me to the Ortofon Cadenza Blue I have now on my VPI Prime. Your Delos is .6mv, I believe, which is really perfect for the SP20 phono stage.

You might have turn increase the volume setting a little from your current setup, but you won’t suffer any noise floor problems. It’s a very quiet component. My dealer wanted to sell me a Linn LP12 with that cartridge they had just released in the fall of 2015. It was like .25mv—well below the recommended ARC matching specs. But during our demonstration there was still almost no discernible noise from the phono stage.