Arrangement of components on rack


Now and again -- though not often enough, probably -- I spend some time unhooking and unplugging everything in my system, dusting the works, and then setting it all back up again. Makes me feel better, and it seems that the simple act of unplugging and then reattaching cables and power cords etc. improves the sound, too -- if only in my mind.

As I'm getting ready to do that now, I just had a thought: Is there a generally accepted arrangement for components sharing a rack? What I mean is: Are there components that ought be placed close together and those that should be better spaced out? My power amp sits between my speakers, with the rest of the gear over on the side wall.

I've got a turntable, so that takes care of what goes on the top shelf. The other components: A preamp, a separate phono preamp, a CD transport and DAC in one box, a Bluesound Node streamer.

With all else equal, should, say, the phono preamp and the preamp be near each other? Far apart? does it not matter? I've generally just kind of plunked things down and gone from there -- and haven't experienced too much trouble -- though some years back when I had the preamp (the main one, not the phono pre) up close to the turntable I had a bit of hum, so put the preamp on the bottom shelf and have continued to do so.

Still, as I got to wondering and am set to get to work on this soonish, I thought I'd ask if there's a generally accepted way of arranging things.

Thanks very much.

-- Howard

hodu
I try to separate the source components from the amplifier as far as possible so turntable on the top and amplifier on the bottom with the sources and preamplifier in the middle of the rack making sure to keep a good distance between components and keep the wiring neat and tidy away from the wall with air to breathe around the connections and other wires to avoid noise and ground loops.
Post removed 
Amps like ventilation so should be on top? That sounds good, except amps are heavy so I put them on the bottom of the rack for stability and to make sure the rack isn’t top heavy. And the speaker cables go directly to the speakers without having to pass through the rack.

On top of the amps I then have an Audioquest Niagara and the preamp above that along with various components. 

I try to keep the power cords on one side of the rack and everything else on the other.

YMMV - Good Luck
MC

You may at times provide knowledgeable information, but really, you are verbose.
If you’re going to contribute, do so concisely. And lose the advertising and criticism too.

This forum is not really Facebook, it’s a forum for people with HiFi equipment to share their knowledge of their equipment to help them with problems or advice.

Sorry, you are you are just blow-harding. Average equipment, average opinions.

AG 🇦🇺

amg56
  Facebook seems to have gotten the best of MC. Like most tRumptards, he can't help himself! On the other hand (when he's not schilling for Tekton) he definitely knows his audio and offers mostly very sound advice.