Are you recording your vinyl?

I've been doing this for a very short time but i am pleased with the outcome so far. I'll try to be brief.

Rega p5 ttpsu into Vac Sigma 160i phono stage, pre-amp outs to Korg MR2000S 5.6mhz DSD recording. I then transfer the files from the Korg to my Mac Mini and playback through my Playback Designs MPD-3.

Excellent vinyl sounds every bit as exquisite when played back digitally...good to average vinyl is a toss up as it just sounds different from the digital cd version. For the most part when comparing a redbook cd compared to the same tracks recorded from vinyl the vinyl version's digital playback is preferred by me and others who i can wrangle into giving a sh%!.

I'm sure my vinyl setup is probably not as strong as it should be for true archiving but it is very pleasing to me. In the future, i will look for the 45rpm version of a recording first ala the Blue Note reissues...then i'll buy new music digitally in at least 24/96 if no good vinyl version exists.

Its worth the effort in my opinion.

T Bone, if by protocol, you mean interface, I use a USB cable to connect directly to the Playback Designs MPD-3.

I'm still experimenting but a good vinyl album, recorded in 5.6mhz 1 bit (double the sample rate of SACD's) and then played back either in native 5.6mhz DSD or even downsampled to 24/384 or 24/192 is spooky good. I can say in my experience that the 5 or 6 vinyl albums i have recorded where i also own the redbook CD it easily surpasses the redbook. In fact, the double DSD playback is so close to the vinyl that I believe it would be hard for most people to discern the difference. Now i know there are those out there who will insist that their $200,000 vinyl setup sounds better.....they are probably right. For most of us, i believe this is a terrific solution and the sound quality on par with better vinyl setups. YMMV

Paul, certainly I agree and the usual disclaimers apply, including, I reserve the right to do something stupid, swap in or out a perfectly excellent component with one that screws up all synergy! LOL!

As of this date:
Vinyl: Rega P5, Exact 2 Cartridge, TTPSU
(Okki Nokki record cleaner prior to recording)
Integrated: VAC Sigma 160i with phono(Shunyata BM PC)
DAC: Playback Designs MPD-3(Shunyata Taipan PC)
Digital Recorder: Korg MR2000S(Cardas GR PC)
Computer: 2010 Mac Mini, 4TB firewire HD, 4mb RAM, Pure Music
Speakers: Wilson Audio Duettes (in blue....it could affect the sound!)
Speaker cables: Cardas Clear light
Interconnects: Cardas Clear light
Power: Running Springs Jaco with 20a Running Springs Mongoose

Paul, excellent question as you can probably tell, i've been tinkering and experimenting.

This may be a bit long but it is important if you are considering a path such as this to understand what i have done....you may see a better way through my trial and error.

I clean the record throughly along with the stylus, record the album in 2 times DSD to the Korg. The files are then moved from the hard drive of the Korg to my computer. I then use the Korg Audiogate software to strip the tracks into whatever format I choose. I've been experimenting with different resolutions and I may have led you to believe that I was converting the double DSD to 24/192 for playback. I did do that (along with 16/44, 24/48, 24/96, 24/192) with some tracks to compare sound quality. To me they all sounded better that my redbook versions of the same recording, each surpassing the prior. The double DSD files played back through the Playback Desingns is simply amazing when compared to any of the PCM files.

As far as playing from the Korg directly to the Playback Designs, the only way I can see that would be possible would be to take the digital out from the Korg and directly connect via spdif rca to the input on the MPD-3. i have not tried that and probably won't as the Korg has no remote, the file access and track selection capabilities are not as user friendly as my MAC. Playing back directly from the Korg utilizing its analog output section is pretty decent. If i were setting up a second system, the Korg and a computer would be the centerpiece but the 80 gig hard drive on the Korg is a limiting factor and no streaming is possible. You would have to move files between the two. I've explained this to the numerous people who have emailed as I kindof think of the Korg as a modern day reel to reel deck.

In a nutshell, record your vinyl in double DSD on a Korg, play it back via USB on a Playback Designs MPD-3 at double DSD and i believe most people (especially those without a position to defend) will be unable to discern the difference between the vinyl and the double DSD at 5.6 mhz.

I am also acutely aware that there are many who will be certain that what i have just explained is not possible. Listen, i have no vested interest or stake in any part of this process....I'm just a hobbyist looking for the best fidelity and, believe me, I am not a fan of the care required to play back vinyl but my digital versions of my vinyl sound SOOO much better than my redbook versions of the same disk than it boggles the mind. This may be a statement on the lack of care by the music industry when releasing cd's but nevertheless. Some may even say that the higher sample rates are the determining factor but i tried to eliminate that by taking the base redbook cd version and upconverting to each of the sample rates i was utilizing from my DSD recordings. It is also important to note that the Playback Designs takes EVERY input, regardless of its original sample rate and upconverts to double DSD at 5.6 mhz so my redbook stuff sounds excellent in its own right.

I hope this helps explain where I'm at and that I am simply describing my experiences....I'm no expert and don't intend to imply that I am. Warm regards.....GH