ARC Quality Issues Ref75 Ref5SE Ref10


Over the past two years I had several issues with ARC Ref gear and am wondering if I'm the only one out there having so much "bad luck"?

My issues started when I bought a Ref5SE plus Ref75.
The two meters in the Ref75 had a noticeable different color and had to be replaced by my dealer.

Two of the Ref5SE tube sockets were soldered crooked to the board. I found a loose screw bouncing around inside the chassis when I unpacked it and found that the two crooked tube sockets were not even bolted down to the metal support on the main board. ARC apologized and replaced the brand new Ref5SE.

The replacement Ref5SE blew up after 600 hrs of use. A small component in the power section exploded with a single loud bang with smoke following.

To not end up with a nearly new but repaired preamp I upgraded to Ref10. The Ref10 power section also blew up after two months and only 390 hrs of use. One or more of the smaller white caps in the power section exploded (four or five significant and loud bangs with smoke). My dealer just informed me that ARC is going to replace the failed Ref10 against a brand new one.

I can not believe I am the only one having repeated problems with ARC's new gear!?

Feedback and comments will be greatly appreciated !
decibell
One of the caps in my Ref 250 Amp Blew at 800 hrs and I had to change caps in both Amps .
ARC reliability is not what it is cracked up to be!

ARC buyers just like the sound, and put up with all the problems!

You are not alone!
I will vigilantly follow this thread. My next planned purchase is the Reference 75. Decibel, I know you are having quality issues, but could you please give us your opinion on their sonic attributes? Happy Holidays to all!
Decibell: You have stable A/C and use a power conditioner?
I've had minor issues with ARC but nothing ever exploded.

Most recently, I purchased some ARC 6H30 tubes for my BAT int.
These lasted a few months the started growling at me.
NOS 6H30 DR from BAT ($600) not only sound twice as good but so far show no signs of failure. You get what you pay for (sometimes).
I have a number of ARC components and have not had any real problems. A year or so ago I had a problem with the on/off switch of my Ref 110. No big deal and my dealer took care of it. I have had no problems with my Ref CD7 or DAC 8.

I have owned ARC equipment since the late 1980's. I will say that I feel some of the older gear was made a bit better. I am not a big fan of the plastic switches and buttons which just seem cheap.