Anybody have plans for building Dahlquist DQ-10 speaker stands?

On the dahlquist Facebook site a guy published full dimensions for the stands. 

I am planning to build these:

I built a set of DQ-10 stands years ago.  I bought some 2x2 walnut and a long 2 x12 walnut board.  I cut the board into two pieces so each was about 2/3 the width of the DQ10.  I mounted three 2x2 vertically in the middle and made them 12 inches tall.  I put a 3/4 inch plywood on top of these for the DQ-10's to sit on.  They worked great and I used them for years.  I only wish I had made them taller so the middle of the DQ-10s would be at ear level when I was sitting.  The higher they are the less bass you hear but I had subs, so that didn't matter.

Atlasdoc2, Did you ever come up with the plans for the Dahlquist stands, I have a copy of those plans for the three post type stand

. If you haven’t tracked any down yet I could mail them to you.

The top plate has a bit of an "L" shape on the back side which is a bit hard to visualize on the plan. If you look at the top plate on this link for the solid type stand, which I don’t have plans for, you can see what I mean:

Mike