Any cable delivers more bass than Cardas Golden Reference?

I've got Revel Salon 2 speakers (22k/pair retail). It's generally accepted those are one of the best speakers money can buy. My search for cables ended when i looked inside of those. The cables between external connectors and crossover are about 18ga, not even sure they are pure copper.  And those are big speakers, i think there may be 3ft of cables inside. On top of that, there are pretty lousy connectors on the crossover board and kind of a small switch regulating hi-freq response.
You could have a horse leg thick cable from your amplifier to the speakers but it does not change the internal cables, they are still cheap 18ga.
I also tried a few different cables - i can hear the difference in between very cheap ones and good ones (especially bass), BUT generally all good ones sound similar on a good system. Mostly every good pure copper cable (5-12ga) *should* sound the same if the length is less that 20ft. If the length is shorter the difference should be even smaller.

If you hear something else - your system is bad/unbalanced and you are compensating for something else. Please note i am not disputing you hear the difference, but i tried a thing or two and I know there is no magic there, all physics perfectly holds.

The cable you bought from amazon might have been a cheap one, and 16ga is NOT something i would connect my speakers with. I suggest you start from InstallGear 10 Gauge OFC - you should not hear any difference from 'brand' cables, if you do please throw you 'brand' cables into a rubbish bin.
Do you really think a cable of 5ft can make such a difference when you have another 3ft of 18ga inside the speaker?
I can post photos of the insides of my Salon 2's if anyone has any doubts.

dumbeat: "There is not a slightest doubt that the Cards GR is fuller in the low mid and bottom and is more detailed and upfront in the mid.
And i mean by A LOT!! its not a super fine detail, its like a different speaker altogether"

So what are you suggesting? we stop pointlessly spending money upgrading speakers instead start spending $$$ on copper wires to get better sound??? Sorry - i pass. I take it you did not look inside your speakers... I forgot to mention capacitors and resistors on the crossover board are not wired by anything more than 18ga wires...I don’t dispute personal experience though. People hear different sounds and see different things sometimes.
Especially if they want to see them :) Sorry could not help it! Good luck with your quest anyway!