There's nothing wrong with having equipment and even video between the speakers, for the simple reason there's more to good sound than any one single factor like that. My system is amazing, absolutely stunning imaging (read the comments) and its just like you're talking. https://systems.audiogon.com/systems/8367
Its all a compromise and were I to move everything off to a side or something that requires massive spending on high quality wire, and money that could have been spent making something better is instead nearly wasted just on moving things further away. There is some improvement, yes, and I have heard it. Because I actually tried this stuff. So don't sweat it.
But do try and locate your equipment in something other than a big flat monolithic cabinet. Its the reflection that causes that loses image focus so try and break it up and keep it as far back from the speakers as possible.
The bit above about reflection timing is pretty good. It's actually more like 5ms than 10 but either way you are covered because putting them on the long wall means first reflections that are delayed way more than that.
As for the rest of it, what you will find is its pointless to blather on about it because when the speakers and you are actually in the room it will be obvious the response back against the wall is crap, pulling them out improves immensely, and so does having your listening chair away from the back wall, and so all these distance problems solve themselves.
Use one wire, one outlet, for the system. Another circuit for everything else. Depending on your budget it will be worth the effort to learn a little about acoustic design. I'm talking very, very basic stuff. Like how to frame a wall, 5/8" sheetrock blocks sound almost twice as effectively as 1/2", use a solid core door with weather stripping, even better one specifically designed for audio, things like that. A little knowledge goes a long way.
That's at the budget end of it. What I did. Minimal cost, maximal benefit. There's also panels and construction techniques that can take a room to unbelievable levels of perfection. It all depends on your budget, time and energy.
Ultimately though the main thing to keep in mind is it's a little like Mike Tyson, everyone has a plan until they get punched in the mouth. No matter how good your plan, still ultimately the sound you get is determined by the fine details of where and how you put things in the room. Perfect example of what I'm talking about, look at Mike Lavigne's system. Perfect example of unbelievable level of perfection. Yet for all the money, time and planning, it only got that way after Mike ripped out a lot and changed a lot more and then improved what he had changed.
It's a long road. Enjoy the ride.
Its all a compromise and were I to move everything off to a side or something that requires massive spending on high quality wire, and money that could have been spent making something better is instead nearly wasted just on moving things further away. There is some improvement, yes, and I have heard it. Because I actually tried this stuff. So don't sweat it.
But do try and locate your equipment in something other than a big flat monolithic cabinet. Its the reflection that causes that loses image focus so try and break it up and keep it as far back from the speakers as possible.
The bit above about reflection timing is pretty good. It's actually more like 5ms than 10 but either way you are covered because putting them on the long wall means first reflections that are delayed way more than that.
As for the rest of it, what you will find is its pointless to blather on about it because when the speakers and you are actually in the room it will be obvious the response back against the wall is crap, pulling them out improves immensely, and so does having your listening chair away from the back wall, and so all these distance problems solve themselves.
Use one wire, one outlet, for the system. Another circuit for everything else. Depending on your budget it will be worth the effort to learn a little about acoustic design. I'm talking very, very basic stuff. Like how to frame a wall, 5/8" sheetrock blocks sound almost twice as effectively as 1/2", use a solid core door with weather stripping, even better one specifically designed for audio, things like that. A little knowledge goes a long way.
That's at the budget end of it. What I did. Minimal cost, maximal benefit. There's also panels and construction techniques that can take a room to unbelievable levels of perfection. It all depends on your budget, time and energy.
Ultimately though the main thing to keep in mind is it's a little like Mike Tyson, everyone has a plan until they get punched in the mouth. No matter how good your plan, still ultimately the sound you get is determined by the fine details of where and how you put things in the room. Perfect example of what I'm talking about, look at Mike Lavigne's system. Perfect example of unbelievable level of perfection. Yet for all the money, time and planning, it only got that way after Mike ripped out a lot and changed a lot more and then improved what he had changed.
It's a long road. Enjoy the ride.