From a different standpoint, I had something similar happen with my 2 new VAC Statement monoblocks. Turned out that all fuses aren't necessarily the same. There is a greatly increased amount of current when an amp first turns on and if the fuse is not designed to accept this,it will blow most every time, regardless of its amperage rating. That's what happened to me when I got local Radio Shack slo blo fuses, as compared to the slo blo fuses VAC sent me.
My point is that before you go to any more trouble, just have Quicksilver send you some spare fuses for your amp. They will know which ones to send if you describe your situation. That would be the first thing I would have done. The other suggestions above are also helpful, but the easiest fix to try would probably be what I am suggesting. Good luck.
My point is that before you go to any more trouble, just have Quicksilver send you some spare fuses for your amp. They will know which ones to send if you describe your situation. That would be the first thing I would have done. The other suggestions above are also helpful, but the easiest fix to try would probably be what I am suggesting. Good luck.